785792
6
Zoom out
Zoom in
Previous page
1/80
Next page
5

To turn on the camera, press the ON/OFF button on the bottom of the camera.
The camera turns on automatically when connected to the power source.
To turn off the camera, press and hold the ON/OFF button for about 3 seconds.
The camera will turn off automatically after a few seconds when it is unplugged. If you unplug the
dashcam whilst shooting, the dashcam will save the currently recorded video after a specified time and
turn off.

To access the settings menu, touch on the touch screen of the dashcam.
To scroll through the menu pages, use the arrows on the left side of the screen and touch the item to
activate its setting options. The currently selected item is displayed in orange.
To exit the settings menu, touch the arrow in the upper left corner of the display.

Recording starts when you touch . Press it again to stop recording.
Automatic recording – the automatic recording function is permanently enabled. Automatic recording
starts when the camera is plugged in. In a car with an ignition-dependent power supply, the camera turns
on and starts recording after starting the engine.
Photos are taken by touching the icon or using the voice command “LAMAX, PHOTO”.
Touch the icon to display the Video/Photo gallery. Videos are divided into folders:
Front camera videos
Rear camera videos
Protected front camera videos
Protected rear camera videos
Photo gallery
To switch from video back to gallery, press the arrow in the upper left corner. This also applies to returning
from the gallery to the main screen.

You can delete individual material directly on the camera in the gallery. After selecting the desired item, touch
the bin icon and press Yes to confirm.

When the memory card becomes full, it automatically starts overwriting the oldest captured videos with new
ones. To stop videos from being deleted, you must protect them.
Depending on the sensitivity set, in the event of an impact an activated G-sensor automatically protects
the video currently being recorded, thus preventing it from being overwritten.
The video currently being recorded can be protected with the voice command “LAMAX, PROTECT”.
You can also manually protect the video currently being recorded by pressing the lock icon on the screen
.
You can also protect recordings in the camera gallery: After selecting the desired item, touch the lock icon
located under the time and date on the right side of the screen. You can identify the protected entry by the
grey lock icon in the upper left corner. Press the lock icon again to unprotect the recording.

When the front and rear cameras are properly connected, the front camera image is displayed as the
main camera. Switching between the front and rear cameras is possible using the icon or the voice
command “LAMAX, FRONT” for the front camera, or “LAMAX, REAR” for the rear camera.
Another way to switch between viewing the front and rear cameras is to swipe your finger left or right
on the screen.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lamax S9 Dual at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lamax S9 Dual in the language / languages: English, German, Polish as an attachment in your email.

The manual is 7.64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info