618565
19
Zoom out
Zoom in
Previous page
1/21
Next page
36 37
Problem Possible Cause Solution
11. Bread does not slice well
and is sticky.
•Sliced whilst hot.
•Wrong knife used.
•Allow bread to cool for at
least 30 minutes to allow
steam to escape before
slicing.
•Use a good quality bread
knife.
Crust colour and thickness
12. Dark crust colour,
too thick.
•DARK crust colour selected. •Use MEDIUM or LIGHT
setting next time.
13. Burnt loaf. •Bread maker
malfunctioning.
•Refer to customer care
section.
14. Crust too light. •Bread not baked long
enough.
•LIGHT crust colour selected.
•Carry out a BAKE cycle to
darken the crust.
•Choose DARK or MEDIUM
crust colour next time.
Bread pan problems
15. Kneading paddle cannot
be removed from pan.
•You must add enough
water to cover the
kneading paddle and then
leave to soak for
10 minutes.
•Twist kneading paddle
slightly after soaking to
loosen.
16.Breadstickstopan/
difficult to shake out.
•Lightly wipe the inside of
the bread pan with
vegetable oil.
Bread maker
17. Bread maker not
operating/kneading
paddle not moving.
•Bread maker not switched
on.
•Bread pan not correctly
located.
•Time delay selected.
•Check the product is
turned on.
•Check pan is locked in
place correctly.
•Bread maker will not start
until start time is reached.
Problem Possible Cause Solution
18. Ingredients not mixed. •Did not start bread maker.
•Forgot to put kneading
paddle in bread pan.
•After selecting programme,
presstheSTART/STOP
button to start machine.
•Always make sure kneading
paddle in positioned
correctly on drive shaft in
bottom of bread pan
before adding ingredients.
19. Burning odour noted
on operation.
•Ingredients spilled inside
baking chamber.
•Take care when adding
ingredients to bread pan –
if ingredients spill into
chamber burning can occur.
20. Display screen shows
“H HH” and machine
beeps continuously.
•Temperature inside bread
maker is too high –
machine still hot after the
previous baking procedure.
•PressSTART/STOPbutton,
open lid and allow machine
to cool down for 10 – 20
minutes.
21. Display screen shows
“L LL” and machine
beeps continuously.
•Temperature inside bread
maker is too low.
•PressSTART/STOPbutton,
open lid and allow machine
to return to room
temperature for
10 – 20 minutes.
22. Display screen shows
“E EO” or “E E1”.
•Temperature sensor is
faulty.
•Contact Lakeland Customer
Services for further
information.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lakeland 16147 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lakeland 16147 in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info