655540
11
Zoom out
Zoom in
Previous page
1/14
Next page
AUTOMATIC ARM BLOOD PRESSURE MONITOR
following data: systolic, diastolic, pulse, date and time of the measurement.
The symbol is displayed only in case an irregular pulse heart rate
(arrhythmias)wasdetected.Trytostayrelaxed,withouttalkingormoving.
The segments appearing on the left side of the display indicate the
classification of the blood pressure values (see paragraph “CLASSIFICATION
OF BLOOD PRESSURE VALUES”). When the measurement has ended, the
device emits a short acoustic signal.
Automatic re-pressurisation
The starting pre-set pressure level is 191 mmHg. If the pre-set pressure is
insufficient in the preliminary reading phase or if the hand or wrist is moved,
the unit will start inflating again until 228 mmHg are reached. Automatic
re-pressurisationisrepeateduntilavalidreadingistaken.Howeverthisis
not sign of a fault with the appliance.
5) The unit switches off automatically, if it is left unused for about 1 minute;
otherwiseyoucanswitchitoffbypressingthe“O/I”key.
Ifyouwanttostopmeasuringforanyreason,simplypressthe“O/I”key
and remove the armband.
Device operation with “voice function”:
If you have purchased the blood pressure monitor with “voice function”, after
havingpressedthe“O/I”key,thedevicesignalsaloudthecorrectpositioning
of the armband; then, inflate it.
At the end of the measurement, the device reads the result.
Toselectthelanguageofthevoicefunction,withturnedoffdevice,keepthe
“M”keypresseduntilthedisplayshowsthemessage“L1”andthedevice
pronounces the corresponding language (e.g. L1= English).
Keepingthe“M”keypressedonceagain,itispossibletoadjusttheaudio
volume;releasethe“M”keywhenthedesiredvolumeisreached.Thedevice
turns off automatically after few seconds.
MEMORY FUNCTION
This device can store up to 60 measurements. After each measurement, the
following values are stored automatically: diastolic, systolic, pulse, date and
time, memory number, reference segments for the classification of the blood
pressure values (see paragraph “CLASSIFICATION OF THE BLOOD PRESSURE
VALUES”) and the possible presence of an irregular pulse (arrhythmias)
.Tocallupthestoredmeasurements,itisnecessarytopressthekeyM,on
the display appears on the left bottom corner the number of the stored
measurements.
Eachpressureofthekeyletthestoreddatascrollandontheleftbottomcorner
of the display appears the memory number.
The number “60” corresponds to the oldest measurement, while the number
“1” indicates the most recent value.
After 60 measurements, the oldest data are deleted automatically.
The stored data are displayed for about 2 minutes.
Afterabout1minutefromthereleaseofthekeyM,thedeviceswitchesoff;
otherwise,itispossibletoswitchitoff,bypressingthekey“O/I”.
Device operation with “voice function”:
If you have purchased the blood pressure monitor with “voice function”, after
havingpressedthe“O/I”key,thedevicesignalsaloudthecorrectpositioning
of the armband; then, inflate it.
At the end of the measurement, the device reads the result.
Toselectthelanguageofthevoicefunction,withturnedoffdevice,keepthe
GB
English
26
11


Need help? Post your question in this forum.

Forumrules
1

Forum

laica-bm2001

Reset search

  • How does the laica work to get accurate bloodpressure metre Submitted on 3-8-2023 at 20:04

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Laica BM2001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Laica BM2001 in the language / languages: English as an attachment in your email.

The manual is 0,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info