813992
9
Zoom out
Zoom in
Previous page
1/32
Next page
INSTRUCTIONS FOR THE INSTALLER 8
2.
2.2.2. Location of the appliance in the
room
Choose a location in the room which
favours good hot-air distribution by
convection and radiation.
2.3. Installation of the appliance
2.3.1. Floor
Make sure that the base can withstand
the total constructed weight of the
appliance and its casing.
Attention: the stove must not be
installed on a combustible floor
2.3.2. Safety distances
Be sure to respect the appliance
installation distances from combustible
materials. Looking at the appliance head-
on:
Atlantic 500
Distance to
combustible
materials
(mm)
From the right-hand side
500
From the left-hand side
500
From the rear
800
From the front
1300
From the top surface
750
Atlantic 610
Distance to
combustible
materials
(mm)
From the right-hand side
600
From the left-hand side
600
From the rear
900
From the front
1200
From the top surface
750
Atlantic 610R
Distance to
combustible
materials
(mm)
From the right-hand side
400
From the left-hand side
400
From the rear
250
From the front
1000
From the top surface
750
Bear in mind that it may even be
necessary to protect non-combustible
material in order to prevent breakage,
deformation, etc., as a result of
overheating if the non-combustible
material is not designed to withstand high
temperatures.
2.3.3. Checks before lighting for the first
time
Make sure that the glass/es is/are
not broken or damaged.
Make sure that the flueway is not
obstructed with packing or loose parts.
Make sure that the airtight joints
on the flue circuit are in perfect
condition.
Make sure that the doors close
properly.
Make sure that all moving parts are
fitted in place.
2.3.4. Height adjustment and levelling the
appliance
The appliance must be perfectly level,
horizontally and vertically, both at the
front and on the sides (use a spirit level).
2.3.5. Connection to the flue
The appliance must be connected to the
chimney flue using special piping designed
to resist the products of combustion (e.g.
stainless steel, enamelled steel, etc.).
To connect the flue to the socket flange,
insert the piping inside the flange and seal
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lacunza Atlantic 610 - R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lacunza Atlantic 610 - R in the language / languages: English as an attachment in your email.

The manual is 6.92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info