765302
11
Zoom out
Zoom in
Previous page
1/48
Next page
LaCie d2 Thunderbolt 2 | USB 3.0 User Manual 11
LED BUTTON
The LED is a button that can be used to power off/on the LaCie d2.
Power off
Follow the steps below to turn the device off:
Make certain that the LaCie d2’s volumes are not being accessed.1.
Eject the LaCie d2’s volumes. See Unmounting Your Hard Drive for instructions. Once the volumes have been2.
properly ejected, the LaCie d2 enters power-saving mode.
Apply a long press, a minimum of four seconds, to the LED button. The LED turns solid blue before turning off.3.
Power on
In most instances, the LaCie d2 powers on automatically when connected to a computer and an active power
source. However, the LED button can be used to power on the device if the following two conditions are met:
The LaCie d2 was powered off using a long press
The LaCie d2 remains connected to the computer’s USB port and an active power source
To power on the LaCie d2, push the LED button for one second.
Power-saving mode (Thunderbolt 2 connection only)
Your LaCie d2 can conserve energy by entering power-saving mode. The hard drive within the enclosure spins
down to reduce power consumption when the LaCie d2 is in power-saving mode. Power-saving mode can extend
the life of the hard drive by sparing it from working during extended periods of inactivity. The LaCie d2 can be
placed into power-saving mode using the LED button when it is connected via the Thunderbolt 2 port. To place
the LaCie d2 into power-saving mode:
Make certain that the LaCie d2’s volumes are not being accessed.1.
Eject the volumes (see Unmounting Your Hard Drive).2.
Apply a short press to the LED button. A short press lasts no longer than 1 second.3.
To wake up the LaCie d2, apply another short press.
Power-saving mode: daisy chain
You can daisy chain Thunderbolt 2 technology and first generation Thunderbolt technology devices when the
LaCie d2 is in power-saving mode. Though the hard drive spins down when the LaCie d2 enters power-saving
mode, the Thunderbolt 2 signal remains constant. Therefore, daisy-chained devices continue data operations
without interruption. See Daisy Chain (Thunderbolt 2) for further details.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LaCie d2 Thunderbolt 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LaCie d2 Thunderbolt 2 in the language / languages: English as an attachment in your email.

The manual is 1,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of LaCie d2 Thunderbolt 2

LaCie d2 Thunderbolt 2 User Manual - German - 48 pages

LaCie d2 Thunderbolt 2 User Manual - Dutch - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info