INSTALLER’S MANUAL
【11】
J
Adjusting reduced ow of hob burners :
After connection or change of gas, it is crucial to modify this adjustment :
► Remove the knob.
► Light the appropriate burner.
► Adjust to minimum setting.
► Use a small screwdriver to set the adjusting screw J (fig.【11】).
N.B : Flame is reduced to of its size in the minimum setting, the burner must remain lit when
changing from maximum setting to minimum setting.
Adjusting the safety devices for each thermocouple of the hob: :
If the burner goes out, having kept the control knob pushed in for roughly twenty seconds, check
that :
- The magnetic head grip the valve moderately.
- The flame touches the point of thermocouple (fig.【12】).
- The thermocouples and magnetic heads are absolutely clean.
【12】
K
Changing the oven gas type :
Oven injector :
► Remove the base.
CAUTION: when refitting place the base underneath the groove on the fascia (fig.【13】).
► Remove the drawer.
► Unscrew nut I from the injector holder with a size 7 wrench (fig.【14】).
CHANGE OF GAS
【13】
【14】
I