Manual Lacanche LCF 1141 (page 20 of 48) (English)

495546

Zoom out

Zoom in

1/48

INSTALLER’S MANUAL

Adjustment of oven reduced flowrate :

Adjustment is VITAL after connection or any change of gas.

The adjustment screw L, (fig.【19】) can be accessed once the control knob has been removed.

► Light the appropriate burner.

► Pre-heat the oven for roughly 1/4 hour (thermostat 10).

► Adjust to minimum setting (thermostat 1).

► Use a small screwdriver to set the adjusting screw (work quickly before the thermostat reacts and

burner returns to maximum flow).

N.B : Flame is reduced to  of its size in the minimum setting, the burner must remain lit when

changing from maximum setting to minimum setting.

Adjusting the oven thermocouple safety devices :

If the burner goes out, having kept the control knob pushed in for roughly twenty seconds, check

that :

- The magnetic head grip the valve moderately.

- The tip of thermocouple M should be touched by the ame (g.【12】) without coming into

contact with the burner.

- The thermocouples and magnetic heads are absolutely clean.

【19】

【20】

3 mm

Ft 125a - GB - Rév 02 - Modifié le : 08/09/08 20/48

CHASSAGNE

CHAMBERTIN

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Lacanche LCF 1141 in the language / languages: English as an attachment in your email.

The manual is 4,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Lacanche LCF 1141 Manual

Product: