495551
22
Zoom out
Zoom in
Previous page
1/48
Next page
INSTALLER’S MANUAL
All work on or repair of an appliance must be carried out by a qualied installer.
Gas repairs
Greasing gas valve :
The valve may lose its grease through use. It is therefore necessary to grease the valve in order to
make it leaktight and facilitate turning.
1 - Shut off the valve and / or the main electrical supply of the unit.
2 - Take out the knob corresponding to the gas valve to be greased.
3 - Unscrew the head from the body of the burner valve.
4 - Grease the tap shaft (High temperature lubricant, for example : SILICAL GEL ™ BARBAHL).
Caution ! Any excess grease should be removed.
Reverse operation 3 to 1 (in that order) to put valve and knob back on.
Limiting thermostat :
In accordance with the construction regulations, the limiter thermostat is intended to protect the
range from overheating.
In the event of overheating the limiter thermostat is triggered
and cuts out the range’s oven functions.
The advanced technology used in the limiter means that
it is very sensitive to impacts and vibration that may occur
during transport and handling.
The limiter may therefore be unexpectedly triggered when
the oven is first heated and stop the oven from working.
To reset limiting thermostat :
For conventional electric ovens
1- Remove the ventilation strip from the rear of the
hob.
2- Unscrew the cover protecting the knob.
3- Press the knob marked V (fig.5)
For the lateral electric oven
1- Clear the rear of the appliance so that you can get your
hand behind it.
2- Press the knob at the back of the oven marked W
(fig.6) .
NB: ALWAYS LOOK FOR the reason why this thermostat
was triggered
For electric hobs :
The pushbutton is located under the hob. To access it, it
is necessary to open the hob (see paragraph “Opening
and refitting the hob”) and press the pushbutton W (fig.
7).
NB: ALWAYS LOOK FOR the reason why this thermostat
was triggered
REPARATIES
W
5
V
5
X
6
Ft 145a - GB - Rév 02 - Modifié le : 08/09/08 22/48
SAULIEU
SAVIGNY
:
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lacanche LCF 1132 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lacanche LCF 1132 in the language / languages: English as an attachment in your email.

The manual is 5,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info