INSTALLER’S MANUAL
All work on or repair of an appliance must be carried out by a qualied installer.
Gas repairs
Greasing gas valve :
The valve may lose its grease through use. It is therefore necessary to grease the valve in order to
make it leaktight and facilitate turning.
1 - Shut off the valve and / or the main electrical supply of the unit.
2 - Take out the knob corresponding to the gas valve to be greased.
3 - Unscrew the head from the body of the burner valve.
4 - Grease the tap shaft (High temperature lubricant, for example : SILICAL GEL ™ BARBAHL).
Caution ! Any excess grease should be removed.
Reverse operation 3 to 1 (in that order) to put valve and knob back on.
Limiting thermostat :
In accordance with the construction regulations, the limiter thermostat is intended to protect the
range from overheating.
In the event of overheating the limiter thermostat is triggered and cuts out the range’s oven
functions.
The advanced technology used in the limiter means that it is very sensitive to impacts and vibration
that may occur during transport and handling.
The limiter may therefore be unexpectedly triggered when the oven is first heated and stop the
oven from working.
To reset limiting thermostat :
1- Remove the ventilation strip from the rear of the hob.
2- Unscrew the cover protecting the knob.
3- Press the knob marked V (fig.【5】)
1- Remove the ventilation strip from the rear of the hob.
2- Unscrew the cover protecting the knob.
3- Press the knob marked V (fig.【5】)
For electric hobs :
The pushbutton is located under the hob. To access it, it is necessary to open the hob (see
paragraph “Opening and refitting the hob”) and press the pushbutton W (fig.【6】).
REPARATIES
V
【5】
W
【6】
