812598
18
Zoom out
Zoom in
Previous page
1/36
Next page
MANUAL FOR USE AND MAINTENANCE
18 LSC 001 -UK- REV. 06
STARTING UP AND PROGRAMMING THE APPLIANCE
(Range S3 - Seletron model)
FOLLOW THE INSTRUCTIONS BELOW REFERRING TO THE PARTS LIST ON PAGES 27/34.
3.1 STARTING UP
BOILER WATER FILLING
a) Turn on the water supply tap, which was tted during the system pre-arrangement phase (2 - Fig.1 - page
6).
b) Make sure that the mains water pressure (more or less 4 bar) is shown on the motor-driven pump
pressure gauge (17).
c) Push the knob on the manual lling valve on the appliance (1) downwards until the boiler level indicator
is halfway (2).
SWITCHING ON THE APPLIANCE ELECTRICALLY
a) Turn on the main switch (1 -Fig. 1 - page 6), then turn on the appliance switch (3) moving the lever to
the ON position and making sure that the display (33) switches on.
NOTE. According to the amount of water manually lled, it is possible to program the automatic
ller system to operate when the switch (3) is turned on and until the correct water level in the
boiler for standard operation has been reached.
HEATING PHASE AND PREPARATION OF THE APPLIANCE FOR OPERATION
a) Attach the lter holders (11) to the delivery groups (16).
b) Open the steam delivery knobs (5) (by turning them anticlockwise) and leave them open; then move
the steam wands (8) over the grid (10).
c) Wait for steam to come out of the wands (8) (about 15 / 20 minutes) and then close the steam delivery
knobs (5) (by turning them clockwise).
d) Wait for the appliance to reach the operating temperature, which was preset during installation. The
setting in °C can be visualized on the display (33) on the control panel, or alternatively on the pressure
gauge (4) (pressure 1 bar) on the appliance.
NOTE. The operating temperature is the temperature of the boiler during standard operation.
e) The appliance is ready for use.
BASIC SETTINGS
The appliance is supplied with its basic settings already programmed. These are:
Day of the week
Time
Date (day, month, year)
3
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for La Spaziale COMPACT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of La Spaziale COMPACT in the language / languages: English as an attachment in your email.

The manual is 1.91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info