811770
19
Zoom out
Zoom in
Previous page
1/48
Next page
Sensore fumi
ENGLISH
BOILER ASSEMBLY
DISASSEMBLY / INTRODUCTION / ASSEMBLY
The product is delivered almost completely pre-assembled. Only the lever for cleaning the heat exchanger and the fan unit needs to be
installed.
DISASSEMBLY
Depending on the conditions of the room in which the boiler is installed, some parts of it may be disassembled dierently for transport
purposes.
Weight reduction:
- Removal of suspended plates;
- Removal of ceramic components and refractory panels from the upper and lower combustion chambers;
- Disassembly of the covering door;
- Disassembly of the three boiler doors;
Please note:
When disassembling components from inside the boiler, the disassembled parts must be marked in order to be able to install them quickly
and correctly.
HANDLING
The boilers are screwed onto the transport pallets for safety reasons. Loosen these screws and push the boiler o the pallet.
If the boiler needs to be lifted, there is an eyelet welded to the centre of it.
It is advisable to use a pallet truck when moving it at ground level.
Any disassembly must be adapted to the conditions of the room as well as the type of installation, so that the boiler is not damaged!
ASSEMBLY
If the boiler is installed as delivered, only the following precautions must be taken to complete the system:
- Assembly and alignment of the adjustable feet;
- Assembly of the components of the smoke exhaust system;
- Assembly of the lever for cleaning the heat exchanger (description below).
Positioning the smoke sensor
The smoke sensor is inserted in the dedicated hole above the ue ange and it is
locked in place by means of a self-tapping screw.
(See image to the side)
CONNECTING THE SMOKE EXHAUST SYSTEM
The connection between the smoke exhaust and the chimney ue must be chosen according to the chimney calculation and the congurations
that the installation room allows.
It is necessary to take into account product and installation regulations.
The smoke exhaust system and relative gasket are not pre-assembled.
This unit can be installed at dierent angles depending on the installation site and the position of the chimney.
The possible variants, vertical and 45° to the right/left, are shown below.
Smoke sensor
1919
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for La Nordica LNK40 EVO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of La Nordica LNK40 EVO in the language / languages: English as an attachment in your email.

The manual is 4.22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of La Nordica LNK40 EVO

La Nordica LNK40 EVO User Manual - German - 48 pages

La Nordica LNK40 EVO User Manual - French - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info