643400
49
Zoom out
Zoom in
Previous page
1/56
Next page
49
TABLE OF DISPLAY MESSAGES
Chapter 13
ALARMS
Message
Cause Solution
Display
Indicates the presence of an alarm.
This indicator lights up when one of the alarms described
below is in progress and is accompanied by the corresponding
indication on display D1. To reset the alarm, press button 1 and
hold for three seconds when the stove is completely cold.
FUM FAIL
Breakdown correlated to the fumes
exhaust motor.
All restore operations must be carried out by an authorised
technician.
FUMI TC
Breakdown correlated to the fumes
probe.
All restore operations must be carried out by an authorised
technician.
HIGH TEMP
Overloading of pellets.
Adjust the  ow of pellets (see “Pellet Feed Adjustment”).
Other restore operations must be carried out by an
authorised technician.
DEPR FAIL
The door is not properly closed.
The ash drawer is not properly
closed.
The depression sensor is faulty.
The heating chamber is dirty.
The fume exhaust pipe is blocked.
Verify the hermetic closure of the door.
Verify the hermetic closure of the ash drawer.
Verify exhaust pipe and heating chamber are clean.
Other resetting operations must be carried out by an
authorised technician.
NO ACC
The pellet tank is empty.
Pellet load calibration inadequate.
Check the level in the pellet hopper.
Check the procedures described in Lighting”.
Adjust the  ow of pellets (see Pellet Feed Adjustment”)
Other restore operations must be carried out by an
authorised technician.
NO ACC
BLAC OUT
No electricity during the lighting
phase.
Place the stove in OFF using key 1 and repeat the procedures
described in the “Lighting” chapter.
Other restore operations must be carried out by an
authorised technician.
NO PELL
The pellet tank is empty.
No pellet load.
The geared motor does not load
pellets.
Check the level in the pellet hopper.
Adjust the  ow of pellets (see Pellet Feed Adjustment”).
Other restore operations must be carried out by an
authorised technician.
ATTE +
ALLARME
An attempt is made to reset an alarm
white the stove is still cooling.
Whenever one of the alarms described above is tripped, the
stove automatically shuts down.
During this phase, any attempt to reset the alarm will be
blocked, and the display will show the alarm and ATTE in
alternation.
Resetting the alarm by pressing button 1 is only possible after
the stove has completely shut down.
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for La Nordica Babyfiamma at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of La Nordica Babyfiamma in the language / languages: English as an attachment in your email.

The manual is 2,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of La Nordica Babyfiamma

La Nordica Babyfiamma User Manual - German - 56 pages

La Nordica Babyfiamma User Manual - French - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info