Manual La Germania F980 (page 12 of 56) (English, German, Dutch, French, Italian, Portuguese, Spanish)

808670

Zoom out

Zoom in

1/56

CONVERSIONE AD ALTRO

TIPO DI GAS

Prima della conversione ad

altro tipo di gas, accertatevi del

tipo per il quale l’apparecchio è

stato regolato. (etichetta

adesiva (Figura 1) applicata

sull’apparecchio).

Per il diametro dell’ugello

riferirsi alla tabella degli ugelli.

Sostituzione dell’ugello del

bruciatore inferiore

Rendere privo di tensione

l’apparecchio;

1) Estrarre la suola

copribruciatore (vedi

ESTRAZIONE DELLA

2) Svitare la vite di fissaggio

del bruciatore del forno ed

estrarre dal supporto

insieme all’elemento termico

e alla candela di

accensione. (Figura 5)

3) Togliere l’ugello dall’attacco

con una chiave a tubo da 7

(Figura 6)

4) Avvitare a fondo il nuovo

ugello (diametro impresso in

centesimi di millimetro

sull’ugello) facendo

attenzione all’inserimento

preciso del filetto.

5) Montare il bruciatore

procedendo in ordine

inverso rispetto a quanto

descritto al punto 2.

6) Reinserire la suola nella

7) Regolazione del minimo (vedi

istruzioni a pagina 16)

posizione giusta.

Fig. 5 - Abb. 5 - Afb. 5 Fig. 6 - Abb. 6 - Afb. 6

CONVERSION TO A

DIFFERENT TYPE OF GAS

Before converting the

appliance for operation with a

different gas type, check which

type of gas it is currently set to

operate with (adhesive label

(Figure 1) on appliance).

For the correct nozzle

diameter, refer to the relative

table in this booklet.

Disconnect the electrical

power supply to the appliance;

1) Remove the burner cover

Replacing the lower burner

nozzle

plate (see REMOVAL OF

THE BURNER COVER

PLATE page ).

2) Remove the screw securing

the oven burner and

withdraw the burner from

the support together with

the heat sensor and the

ignition spark plug. (Figure

3) Remove the nozzle using a

7 mm box wrench (Figure 6)

4) Screw the new nozzle in

fully (diameter in hundredths

of millimetre stamped on the

nozzle), taking care not to

cross the thread.

5) Replace the burner

reversing the operations in

step 2 above.

6) Replace the cover plate.

7) Adjusting the minimum flame

(see instructions on page 16)

CONVERSION DE TYPE DE

GAZ

Avant la conversion du gaz,

vérifier que le gaz actuel est

correctement réglé (étiquette

adhésive (Figure 1) appliquée

sur l’appareil).

Pour le diamètre du gicleur,

consulter la table des gicleurs.

Couper la tension;

1) Extraire la sole cache-

Remplacement du gicleur

du brûleur inférieur

brûleur (voir EXTRACTION

sole page ).

2) Dévisser la vis de fixation du

brûleur et extraire du

support avec l’élément

thermique et la bougie

d’allumage (Figure 5).

3) Retirer le gicleur de la

fixation avec une clé à

douille de 7 (Figure 6)

4) Visser à fond le nouveau

gicleur (diamètre en

centièmes de millimètres

sur le gicleur) en faisant

attention à l’insertion précise

du filetage.

5) Monter le brûleur en

procédant dans l’ordre

inverse du point 2.

6) Remettre en place la sole.

7) Réglage du minimum (voir

directives page 16)

SUOLA pagina 44). 44

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of La Germania F980 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 32.05 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

La Germania F980 Manual

Product: