626724
19
Zoom out
Zoom in
Previous page
1/36
Next page
TM
TM
To Set the Pacer Rate (bpm)
- Press and hold the [mode] button for 2 seconds to
change the display from Pacer to P a c e r S e t t i n g
Mode.
- The digits flash on the display because it is being
selected.
The setting procedure
- If the digits are flashing, press the [start/stop] button to
increase the number (steps of 5 BPM); hold the
[start/stop] button to change the number at a higher
speed. Press the [Compass] button to decrease the
number (steps of 5 BPM); hold the [Compass] button to
change the number at a higher speed.
- After you set the pacer, press the [mode] button to
exit the setting sequence.
- If no key-stoke has been activated for 30 seconds, the
setting display will return to Pacer Mode.
NOTE: The setting range of the pacer: 40 bpm to 180 bpm.
9.1 Pacer Mode - Setting the Pacer Rate (bpm)
decrease the bpm
at a higher speed
increase the bpm
at a higher speed
decrease the bpm
increase the bpm
Pacer Setting Mode
(90 bpm)
Pacer Setting Sequence
Dual Time Setting Sequence
hold
compass
hold
start/stop
compass
button
start/stop
button
17
18
19
20
Dual Time Mode
- The 'T-2' indicator will be displayed on the 1st row of the
display.
- The 2nd row of the display shows the dual time:
hour, minute and second.
- The 3rd row of the display shows the calendar: month,
day.
- The indicators around the display show the dual time
in 1 second resolution.
NOTE: The calendar readout of the Dual Time Mode will be
the same as the Current Time Mode.
To Set the Dual Time
- To set the dual time, press and hold the [mode] button for
2 seconds to change the display from the Dual Time
Mode to Dual Time Setting Mode.
- The minute digits flash on the display because they are
being selected.
The Setting Procedures
- Press [mode] button to change the selections following the
Dual Time Setting Sequence shown on the left.
- If the digits are flashing, press the [start/stop] button to
increase the number; hold the [start/stop] button to
change the number at a higher speed. Press the
[Compass] button to decrease the number; hold the
[Compass] button to change the number at a higher speed.
- After you set the Dual Timer, press the [mode] button to
exit the Dual Time Setting Sequence.
- If no key-stoke has been activated for 30 seconds, the
setting display will return to Dual Time Mode.
10.0 Dual Time Mode - Dual Time Mode
10.1 Dual Time Mode - Setting the Dual Time
11.0 Compass Mode - The Precautions
hold
mode
Dual Time Setting Mode
Dual Time Mode
digits have been
selected (flashing)
Calendar
(month-day)
analog
second
dual time
(hour:minute
second)
'T2' indicator
minute hour
Dual Time Setting Sequence
hold
mode
mode
button
mode
button
Increase
the number
increase the
number at
a higher speed
start/stop button hold start/stop
decrease
the number
decrease the
number at
a higher speed
hold compasscompass button
Precautions when Using XG-20
Check the 'What is Magnetic
Declination' section for more detail.
- Keep your XG-20 away from magnets or
appliances which may contain magnetic objects such as
mobile phones, speakers, motors and etc.
- The XG-20, like most magnetic compass,
points to the magnetic North which is slightly different
from the true North.
- Perform the compass calibration in the following
conditions: :
1) when the XG-20 is used the first time,
2) when the 'DIST' indicator is flashing,
3) the battery has been replaced, or
4) when using the compass in a location different
from the place in which the compass had been calibrated.
- To achieve an accurate result, you should avoid
measuring a direction in the following conditions:
1) the watch is close to magnetic/metal objects,
2) the watch is close to electrical appliances, or
3) the watch is inside a moving object or a
ferro-concrete building.
bezel
The features of the HiTrax Scout
which relat to the Compass Mode
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for La Crosse XG-20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of La Crosse XG-20 in the language / languages: English as an attachment in your email.

The manual is 2,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info