606463

La Crosse WS9251 IT plus Manual

8
Zoom out
Zoom in
Previous page
1/26
Next page
35
Firstly, check that the wind-fan and the wind-vane can rotate
freely before fixing the unit. For correct and accurate readings it
is important to mount the sensor so that the front (marked E) is
pointing in East-West direction. The wind sensor should now be
mounted using the screw or cable tie provided onto a solid wall/
panel mast or mast to allow the wind to travel around the sensor
unhindered from all directions (ideal mast size should be from
diameter 16mm to 33mm).
Once the wind sensor is fixed onto the mast, connect the cable
to the corresponding thermo-hygro sensor socket so that
operating power supply can be received and data can be
transmitted to the base station.
The Rain Sensor
For best results, the rain sensor should be securely mounted
onto a horizontal surface about 1 meter above the ground and in
an open area away from trees or other coverings where rainfall
may be reduced causing inaccurate readings.
When securing into place, check that rain excess will not collect
and store at the base of the unit but can flow out between the
base and the mounting surface (test by pouring clean water).
The rain sensor is now operable. For testing purposes, very
slowly pour a small amount of clean water into the rain sensor
funnel. The water will act as rainfall and will be received and
displayed at the base station after about 2 minutes delay i.e.
when the reading interval is reached.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for La Crosse WS9251 IT plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of La Crosse WS9251 IT plus in the language / languages: English as an attachment in your email.

The manual is 0,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info