606463

La Crosse WS9251 IT plus Manual

4
Zoom out
Zoom in
Previous page
1/26
Next page
31
switching areas appearing in star (٭) symbols (only in the
text section at the bottom of the LCD) or the displayed
values respectively.
• The setting of functions, values and units is in all modes
performed by use of the switching areas ٭ON٭ or ٭OFF٭,
٭UP٭ or ٭DOWN٭ or by direct unit selection.
• Advancing to any next respective menu step with ٭NEXT٭,
leaving or terminating all respective modes with ٭EXIT٭.
• Every programming step activated by touching a switching
area on the Touch Screen is being acknowledged by an
acoustic signal (with buzzer switched ON).
• If during any process previously activated by use of the
Touch Screen no further action is activated for about 30
seconds the active process is automatically terminated and
switched back to the normal display mode (automatic time
out).
3 Putting into Operation
Note: When putting the Weather Station into operation it is
important to tentatively perform in close proximity (e. g. on
a table) a complete wiring and setup of the system in the
configuration of its prospective use. This measure serves
to test all components for correct function before placing
and mounting them at their final destinations.
3.1 Power supply
The provision of power to the Weather Station can be performed
by use of batteries, or by AC/DC mains adapter
1. Unwind the cable of the Wind sensor. Connect the Wind
sensor to the Thermo-hygro transmitter by plugging the
connector head into the socket of the Thermo-hygro
transmitter.
2. First insert the batteries into the Thermo-hygro transmitter.
3. Then insert batteries into the Rain sensor.
4. Insert the batteries into the Weather Station (or use the
provided AC/DC adapter (power up into a main outlet). Once
the batteries are installed, all segments of the LCD will light
up briefly and a short signal tone will be heard. It will then
display the time as 0:00, the date as 1.1.05, the weather
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for La Crosse WS9251 IT plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of La Crosse WS9251 IT plus in the language / languages: English as an attachment in your email.

The manual is 0,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info