680749
4
Zoom out
Zoom in
Previous page
1/13
Next page
17
2. Insert the batteries, observing the correct polarity (see
battery compartment marking).
3. Replace the battery cover on the unit.
TO INSTALL AND REPLACE BATTERIES IN THE
WIRELESS THERMO-HYGROMETER
The Wireless thermo-hygrometer uses 2 x AAA, IEC LR3, 1.5V
batteries. To install and replace the batteries, please follow the
steps below:
1. Insert finger or other solid object
in the space at the bottom
center of the battery
compartment and lift up to
remove the cover.
2. Insert batteries observing the
correct polarity (see marking).
3. Replace compartment cover.
Battery replacement
Replace the batteries when the battery symbol of the
Wireless thermo-hygrometer appears above the indoor
humidity display.
When the batteries of the transmitter are used up, the low
battery icon appears above the outdoor humidity display.
Note:
In the event of changing batteries in any of the units, all units
need to be reset by following the setting up procedures. This is
due to a random security code assigned by the transmitter at
start-up. This code must be received and stored by the
Wireless thermo-hygrometer in the first 3 minutes of power
being supplied to the transmitter.
SETTING UP
1. First, insert the batteries in the transmitter (see “To
install and replace batteries in the thermo-hygro
transmitter above).
2. Within 2 minutes of powering up the transmitter, insert
the batteries in the wireless thermo-hygrometer (see “To
install and replace batteries in the wireless thermo-
hygrometer above). Once the batteries are in place, all
segments of the LCD will light up briefly. Following the
indoor temperature/humidity will be displayed. If this
information is not displayed on the LCD after 60 seconds,
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for La Crosse WS9070IT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of La Crosse WS9070IT in the language / languages: English as an attachment in your email.

The manual is 0,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info