606456
13
Zoom out
Zoom in
Previous page
1/15
Next page
30
Outdoor
temperature
3. To reset the minimum and maximum temperature and humidity data, and the times at which they were recorded, press the
SET key continuously for about 3 seconds. This will reset the MIN/MAX data recorded to the current time, date, temperature
and humidity. The current time taken is the normal displayed time and does not regard the time zone set for the unit.
Note: the MIN/MAX data for each transmitter needs to be reset separately.
ABOUT THE OUTDOOR TRANSMITTER:
The LCD display shows the current temperature and humidity at the location of the transmitter. The temperature and humidity is
measured and transmitted to the Weather Station approximately every 4 seconds.
The range of the transmitter may be affected by the temperature and humidity. At cold temperatures the transmitting distance may
be decreased. Please bear this in mind when positioning the transmitter. The LCD contrast on the unit will also be reduced when the
batteries are reduced in power.
LOW BATTERY INDICATOR
Low battery indicator is displayed on the LCD when the batteries require changing.
CHECKING FOR 868MHz RECEPTION
If the outdoor temperature and humidity data are not being received within three minutes after setting up (or outdoor display always
show “- -. -” in the outdoor section of the Weather station during normal operation), please check the following points:
1. The distance of the Weather station or transmitters should be at least 2 meters away from any interfering sources such as
computer monitors or TV sets.
2. Avoid placing the transmitters onto or in the immediate proximity of metal window frames.
3. Using other electrical products such as headphones or speakers operating on the 868MHz-signal frequency may prevent
correct signal transmission or reception. Neighbors using electrical devices operating on the 868MHz-signal frequency can
also cause interference.
Note:
When the 868MHz signal is received correctly, do not re-open the battery cover of either the transmitter or Weather station, as the
batteries may spring free from the contacts and force a false reset. Should this happen accidentally then reset all units (see “Setting
up” above) otherwise transmission problems may occur.
The transmission range is around 100 meters from the Thermo-hygro transmitter to the Weather station (in open space). However,
this depends on the surrounding environment and interference levels. If no reception is possible despite the observation of these
factors, all system units have to be reset (see “Setting up” above).
POSITIONING THE WEATHER STATION
The Weather station provides the option of table standing or wall mounting the unit. Before wall mounting, please check that the
outdoor data can be received from the desired locations.
To wall mount:
1. Fix a screw (not supplied) into the desired wall, leaving the head extended out by about 5mm.
2. Place the weather station onto the screw, using the hanging hole on the backside. Gently pull
the weather station down to lock the screw into place.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for La Crosse WS9057 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of La Crosse WS9057 in the language / languages: English as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info