647695
15
Zoom out
Zoom in
Previous page
1/20
Next page
15
MOUNTING
Note: Before permanently mounting ensure that the Weather Center is able to receive
WWVB signals from the desired location. Extreme and sudden changes in temperature
will decrease the accuracy of the Weather Center, and changes in elevation will result
with inaccurate weather forecasting for the next 12 to 24 hours. These changes will
require a 12 to 24 hour wait before obtaining reliable data. To achieve a true
temperature reading, avoid mounting the TX4U—Remote Thermo-Hygro (or any
transmitter) where direct sunlight can reach the transmitter. We recommend that you
mount the transmitter on a North-facing wall. The sending range is 80-ft (25m) however
obstacles such as walls, concrete, and large metal objects can reduce the range. Place
both units in their desired location, and wait approximately 15 minutes before
permanently mounting to ensure that there is proper reception. The Weather Center
should display a temperature in the OUTDOOR DISPLAY within 5 minutes of setting up.
If the Weather Center loses the signal from the transmitter, it will display the last
temperature reading for 15 minutes. After 15 minutes of not receiving any signals the
OUTDOOR DISPLAY of the Weather Center will display “- -.-”.
THE TX4U—REMOTE THERMO-HYGRO TRANSMITTER
The TX4U—Remote Thermo-Hygro Transmitter can be mounted in two ways:
with the use of screws or,
using the adhesive tape.
A. MOUNTING WITH THE SCREWS
1. Remove the mounting bracket/receptor from the packaging plastic.
2. Place the mounting bracket over the desired mounting surface. Through the
2 screw holes of the bracket, mark the mounting surface with a pencil.
3. Where marked, start the screw holes using the provided screws. Remove
screws from the mounting surface.
4. Align the mounting bracket with the started screw holes.
5. Screw mounting bracket onto the mounting surface. The screws should be
flush with the bracket.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for La Crosse WS-8010U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of La Crosse WS-8010U in the language / languages: English as an attachment in your email.

The manual is 0,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info