626737
3
Zoom out
Zoom in
Previous page
1/12
Next page
- Calculation and display of the windchill equivalent temperature (perceived
temperature).
- Dew points, which are separately computed for every one of the 9
temperature/humidity sensors.
- Air pressure, selectable in inHg or hPa.
- Air pressure tendency (constant, increasing, strongly increasing, decreasing,
strongly decreasing).
- Graphic display of the air pressure changes within the last 24 hours.
- Icon display for weather forecast (sunny, bright, cloudy, rainy).
- Wind strength, selectable in mph, km/h, m/s, knots or Beaufort.
- Wind direction in form of a compass with display of the variations of wind direction
(in place of the wind strength the wind direction can be displayed with a 5º
resolution).
- Storage of minimum and maximum measured values for all sensors incl. assigned
time and date assertion (in case of wind strenght the assigned wind direction is
additionally displayed).
- Acquisition of rain volume with < 0.5 mm resolution (total, 24h, 1h).
- Programmable alarm cababilities at various weather conditions, e.g. danger of frost,
storm, adverse air pressure or temperature tendencies, e.g. at sea or in the
mountains or as an indication for the so called bio weather.
- All important weather informations are simultaneously displayed on the LCD, making
it unnecessary to perform any special handling of the device to recognize the
present weather.
- Several Base Stations can be operated simultaneously in order to display the sensor
data at various places at the same time. Additional Base Stations can be ordered
optionally.
Please read this Operation Manual carefully and completely before first setup in
order to avoid functional disturbances and mishandling.
Especially observe the notes on mounting and calibration of the measurement
sensors.
The indoor and outdoor sensor system of the Weather Station works by exclusive use of
remote data transmission. Remote sensors can thus be placed and mounted as far as
330 ft (100 m) from the Base Station in open field (strongly depending on the local
environmental conditions).
The outdoor sensors get their operating power from integrated solar cells. Please
therefore carefully observe the notes on placing and mounting of these components in
order to guarantee regular function of the total system.
Note!
Please note that for operation of the Weather Station there is at least one Remote
Sensor necessary since the Base Station itself does not contain any sensors.
5. Shipment Contents
Before setting up the Weather Station please check the shipment‘s entirety by use of the
following list.
Unit consisting of Fittings Picture
Base Station see cover
Remote Wind
Sensor Sensor Head 1 x Magnet 4Dia.x15
Holder Tube 2 x Bracket for Mast Holder
Mast/Wall Holder 4 x Washer 15Dia. for M6
4 x Nut M6
2 x Screw M3.5x6x0.6
2 x Screw M3.5x12x0.6
Remote Rain Volume
Sensor 1 x Magnet 4Dia.x15
8 x Screw 3.5Dia.x30 incl. Dowel
Remote Indoor Sensor
Remote Outdoor
Sensor Sensor Head 1 x Magnet 4Dia.x15
Mast/Wall Holder 2 x Bracket for Mast Holder
4 x Washer 15Dia. for M6
4 x Nut M6
2 x Screw M3.5x6
4 x Screw 5Dia.x55 incl. Dowel
6. Description of Measuring Devices (Sensors)
The sensor concept of the Professional Remote Weather Station consists of two sensor
groups. For operation of the Weather Station a Remote Indoor Sensor is generally
necessary. It transmits a fixed data telegram determining the display of temperature and
humidity in the display section for the indoor values in the upper left part of the LCD. The
sensor is immediately operable since addressing is only necessary in very rare
exceptional cases.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for La Crosse WS-7015 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of La Crosse WS-7015 in the language / languages: English as an attachment in your email.

The manual is 1,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info