Manual La Crosse WS-7014U-IT (page 16 of 19) (English)

647693

Zoom out

Zoom in

1/19

The Wireless Weather Station comes with the table stand

already mounted. If you wish to use the table-stand all that is

required is to place the Wireless Weather Station in an

appropriate location.

B. WALL MOUNTING

1) Remove the table-stand. To do this, pull down on the stand

from the rear and rotate forward.

2) Fix a screw (not included) into the desired wall, leaving

approximately 3/16 of an inch (5mm) extended from the wall.

3) Place the Wireless Weather Station onto the screw using the

hanging hole on the backside.

4) Gently pull the Wireless Weather Station down to lock the

screw into place.

TROUBLESHOOTING

NOTE: For problems not solved, please contact La Crosse Technology.

Problem: No reception of WWVB time signal.

Solution: 1) Wait overnight for signal.

2) Be sure Weather Station is at least 6 feet from any electrical devices, such as

televisions, computers, or other radio-controlled clocks.

3) Remove batteries for five minutes, reinsert and leave the unit alone overnight

without pressing buttons.

4) If there are still problems, contact La Crosse Technology

Problem: Hour is incorrect (minute and date are correct)

Solution: Be sure correct time zone and daylight saving time settings are selected.

Problem: The LCD is faint

Solution: 1) Set the LCD contrast to a higher number

2) Replace batteries

Problem: No outdoor temperature is displayed.

Solution: 1) Remove all batteries, reinsert into sender first, then display.

2) Place remote sender closer to display.

3) Be sure all batteries are fresh.

4) Place Remote Control Sender and Weather Station in position so the straight-line

signal is not passing through more than two or three walls.

Problem: Temperatures do not match if units are placed next to each other.

Solution: Each temperature sensor is manufactured to be accurate to within 1 degree plus or

minus and under normal conditions, so two sensors could be as much as 2 degrees

different. However, the difference can be exaggerated further because the sensors

are designed for different working environments. The indoor sensor is less

responsive to ambient air currents because of the shielding effect of the display's

case. In addition, the case can act as a heat sink to absorb and store heat from

external sources (i.e. handling of the case or radiant heat). Also, the much greater

range of the outdoor temperature sensor requires a different calibration curve than

the indoor range. Error is usually greater at the extreme ends of a range, making it

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of La Crosse WS-7014U-IT in the language / languages: English as an attachment in your email.

The manual is 0,46 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

La Crosse WS-7014U-IT Manual

Product: