680730
6
Zoom out
Zoom in
Previous page
1/30
Next page
39
RAIN SENSOR
Powered by 2 x AA LR1 batteries
Self-emptying bucket
Transmission range: about 50 meters (Open field, free of
obstructions).
SETTING UP:
IMPORTANT: Make sure to observe the correct polarity when inserting batteries. The
"+" markings on the batteries must line up with the diagrams inside the battery
compartments. Inserting the batteries incorrectly may result in permanent damage
to the units. During the setup process, place the wireless display and the outdoor
sensors on a surface with 1-3 meters between the sensors and the display. Only use
Alkaline Batteries for the Wireless Display and Thermo-hygro sensor,
rechargeable batteries may not work.
1. It is important to allow sufficient light to reach the
solar panel while activating the wind sensor.
Make sure the lights are on in the setup room
and the solar panel is facing a 60W light bulb or
brighter - do not cover with hands or other
objects. Remove the black protective foil on the
solar panel and use the provided plastic reset rod
to gently press the reset button once in the hole
on the bottom of the sensor.
2. Twist open the top of the rain sensor. Remove the securing tape from the
seesaw. Install batteries. Swing the seesaw once to ‘wake-up’ the rain sensor.
The rain sensor should then be placed under a clear environment.
IMPORTANT: Completely reset the rain sensor:
a. Unscrew the battery cover on bottom of the
rain sensor and remove the batteries
b. Wait 20s, then re-insert the 2 x AA batteries
and re-screw the battery compartment back
c. Swing the seesaw once and put the rain
cover top back.
d. Place the rain senor under clear
environment.
3. Insert two "C" size batteries into the thermo-
hygro sensor with the correct polarity.
4. Insert three "C" size batteries into the wireless
display with the correct polarity.
Press Reset Button on Bottom
of the Wind Sensor (Solar
Panel Must Face Light)
Unscrew Battery
Cover on Bottom on
the Rain Sensor
Seesaw
Top view
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for La Crosse WS-2812-IT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of La Crosse WS-2812-IT in the language / languages: English as an attachment in your email.

The manual is 1,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info