606451
13
Zoom out
Zoom in
Previous page
1/40
Next page
P a g e | 13
When you click the Resynchronize menu option, the Synchronize dialog will appear.
Once we have the synchronize dialog displayed on your computer we are ready to put the weather station in
synchronize mode.
DON’T CLICK THE SYNCHRONIZE BUTTON YET!
At this point, we need to leave the software portion of the synchronization process and get the weather station
into synchronize mode.
The reason we need to now prepare the weather station for synchronization is that once the
Synchronize button is pressed, the software will scan for a weather station for approximately 30 seconds.
The same is true of the weather station – once it is put into synchronize mode it will scan for a USB device
for approximately 30 seconds. We need to have both the software and the weather station in synch
mode at the same time for the synchronization to be successful.
Place the weather station approximately 3 to 6 feet from the USB communications device (the USB device is
attached to your computer at this point).
Note: The software will refer to this as the ‘USB-Stick’.
With the synchronize dialog displayed on your computer, continue to the section titled Putting the Weather
Station in Synchronize Mode.
PUTTING THE WEATHER STATION IN SYNCHRONIZE MODE
To synchronize the weather station with our computer, we need to put the weather station into scan or
synchronize mode.
QUICK INSTRUCTIONS
On the weather station, press and hold the button showing a down arrow until the weather station beeps
(approximately 3-4 seconds). Next click the synchronize button on the software (the ‘Synchronize’ message box
should still be displayed on your computer) and the weather station will attempt to synchronize to your PC. Within
a minute or two, data from the weather station will display on the Current Weather tab on your computer.
For detailed instructions, continue to the next section.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for La Crosse WS-2800-IT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of La Crosse WS-2800-IT in the language / languages: English as an attachment in your email.

The manual is 1,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of La Crosse WS-2800-IT

La Crosse WS-2800-IT User Manual - English - 31 pages

La Crosse WS-2800-IT Quick start guide - Dutch - 3 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info