626739
5
Zoom out
Zoom in
Previous page
1/21
Next page
Model: WS-1517 www.lacrossetechnology.com/support 5
IMPORTANT: Make sure to observe the correct polarity when inserting batteries (not included). The + markings on the
batteries must line up with the diagrams inside the battery compartments. Inserting the batteries incorrectly may
result in permanent damage to the weather station. During the setup process, place the wireless display and the
outdoor sensors on a surface with 5-10 feet between each sensor and the display.
STEP 5: Weather Station
1. Connect 7.5 V A/C adapter provided, to the weather station and plug into to the wall power outlet.
Note: The A/C adaptor connection is required for automatic backlight control to function. When the
weather station operates on battery power alone, the auto backlight control function is disabled.
2. Connect the table stand to the back of weather station to place on a table or other horizontal surface.
Optional battery operation:
3. Slide the battery cover tab down and pull out to open the battery compartment on the back of the weather station.
4. Insert four (4) AA size Alkaline batteries according to the polarities shown and replace the battery compartment door,
(optional).
5. Once the weather station is powered, the display will show all available LCD segments for a moment.
IMPORTANT: Do not press any buttons during the setup process which takes 5-15 minutes. During this time the weather
station will flash the pressure and weather icon and InHg (inches of mercury). Setup is completed when the weather
station shows default settings for pressure and altitude (sea level), indoor/outdoor temperature and humidity, wind and
rain readings, etc.
InHg
STEP 6:
Set Wind Direction
1. Wait until all the sensor readings are received by the weather station.
2. Manually point the wind direction vane to the North (use a compass or map if necessary).
3. Press the SET opening located inside battery compartment with a paper clip or similar tool. This will set the local wind
direction to North.
Only press once. Continued presses of the SET opening, toggles the wind
direction between the factory defaults preset or manual set direction.
Note: Repeat this procedure every time when changing the batteries.
4. Watch for the next update to ensure the direction changed to North.
Step 7: Program the weather station. See “Program Menu” below.
Note: This weather station has been designed to work right out of the box 10-15 minutes after setup.
Language and City Code are the only required items to set in the program menu. When the WWVB radio-controlled time
signal is received, the time and date will be set according to city code selected.
There are additional operational details and suggestions for custom settings and alarms including:
The time alarms
The temperature alerts
Daily rainfall alerts
Wind alerts
Local Pressure
See “Custom Settings” for details on these optional settings.
Flashes 5-15 minutes during setup
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for La Crosse WS-1517U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of La Crosse WS-1517U in the language / languages: English as an attachment in your email.

The manual is 1,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info