626738
13
Zoom out
Zoom in
Previous page
1/20
Next page
49
Note:
After power up, the time and date and total rainfall are displayed as "- - -". After time is adjusted
manually, the set time will be shown.
SWITCHING ON/OFF THE BUZZER
User may choose to turn off the buzzer so that when the time alarm is switched on and activated,
the buzzer will not sound but we can still see the alarm icon ((())) flashing on the LCD for time
alarm.
On the other hand, when the buzzer is turned off and any weather alarm is activated, the
particular weather digits will flash to show user that the weather condition is being out of the
preset threshold value, yet the buzzer will not sound.
To switch off the buzzer:
1. In normal display mode, press and hold the SET key until the icon "BUZZER OFF" is
shown at the right side above the Wind direction scale. The LCD will change to setting
mode.
2. Press ALARM or HISTORY key once to return to the normal display mode. The "BUZZER
OFF" icon will still be shown.
To re-enable the buzzer:
1. When the BUZZER OFF icon is shown on LCD, press and hold the SET key until the
BUZZER OFF icon disappears.
BUZZER OFF icon
50
2. Press ALARM or HISTORY key once to return to the normal display mode. The "BUZZER
OFF" icon will no longer be shown. Then the alarm will sound normally.
LOW BATTERY INDICATOR
The low battery indicator of the weather station and the transmitter will be displayed at the top
and bottom portion of the LCD respectively when the battery power is low. It is recommended to
replace the batteries in all units on an annual basis to ensure optimum accuracy of the system.
Note:
After battery change, both the Weather Station and the transmitters need to be reset (see
note ”Setting up”)
The History data record will be clear after the battery change.
OUTDOOR TRANSMITTER 915 MHz RECEPTION CHECK
The outdoor temperature, humidity, wind data are transmitted from thermo-hygro transmitter
every 4.5 seconds; the rainfall data are transmitted from the rain sensor every 6.25 seconds. The
receiver will be synchronized to the thermo-hygro transmitter and rain sensor then. The
transmission range (up to about 330 feet /100 meters) of the thermo-hygro transmitter/ rain
sensor may be affected by the ambient temperature. At cold temperatures, the transmitting
distance may be decreased. Please keep this in mind when placing the transmitter and the rain
sensor.
If (1) the outdoor data are not being received within first several minutes after setting up; (2) the
outdoor display always show “- - -“ on the outdoor display; or (3) the reception icon of thermo-
hygro transmitter (Mode 1) and rain sensor (Mode 2) is not displayed on the display, user shall
check the following points:
1. The distance of the Weather Center or transmitter/ rain sensor should be at least 5 to 6.5
feet (1.5 to 2 meters) away from any interfering sources such as computer monitors or TV
sets.
51
2. Avoid positioning the Weather Center onto or in the immediate proximity of metal doors or
window frames.
3. Using other electrical products such as headphones or speakers operating on the same
signal frequency (915 MHz) may prevent correct signal transmission and reception.
4. Neighbors using electrical devices operating on the 915 MHz signal frequency can also
cause interference.
5. “Visibility” of weather center and transmitters increases the range.
Note:
When the 915 MHz signal is received, do not re-open the battery compartment cover of either the
transmitter/ rain sensor or Weather Center, as the batteries may spring free from the contacts
and force a false reset. Should this happen accidentally then reset all units (see Setting up
above) otherwise transmission problems may occur.
During normal operation, after the outdoor display shows "- - -", the weather center will change to
receive the outdoor data every 15 minutes, until the data is read. Then the reception period for
thermo-hygro transmitter will return to 4.5 seconds (6.25 seconds for rain sensor).
If no reception is possible despite the observation of these factors, all system units have to be
reset (see Setting up).
POSITIONING:
Prior to permanently affixing any of the units, please ensure the following points are considered:
Cable lengths of the units meet with your distance requirements at the point of fixing
Signals from the sensors can be received by the base station at points of mounting
The Weather Center
The Weather Center has been designed to be hung onto wall or free standing.
52
To wall mount
Choose a sheltered place. Avoid direct rain and sunshine.
Before wall mounting, please check that the outdoor values can be received
from the desired locations. To wall mount:
1. Fix a screw (not supplied) into the desired wall, leaving the head
extended out the by about 5mm.
2. Hang the station onto the screw. Remember to ensure that it locks into
place before releasing.
The Thermo-hygro Sensor
An ideal mounting place for the thermo-hygro sensor would be the outer wall beneath the
extension of a roof, as this will protect the sensor from direct sunlight and other extreme weather
conditions.
Rain Cover
Main nit
Wall Bracket
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for La Crosse WS-1516-IT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of La Crosse WS-1516-IT in the language / languages: English as an attachment in your email.

The manual is 0,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info