Manual La Crosse WS-1501 (page 7 of 60) (English)

626741

Zoom out

Zoom in

1/60

4. Afterwards, the Weather Center will start receiving data from the transmitter.

The transmission reception icon will be blinking to indicate that the station is

trying to get the thermo-hygro transmitter data. The outdoor temperature,

humidity, wind data should then be displayed on the Weather Center. If this

does not happen after 45 seconds, the batteries will need to be removed from

all units. You will have to start again from step 2.

5. The transmitter reception icon is now blinking again to indicate that the station is

trying to get the rain sensor data. It will stop blinking once the rain sensor has

been detected. If this does not happen after 45 seconds, you will need to start

again from step 2.

6. You may need to check the cable for correct connection and all the components

for correct function by manually turning the wind-gauge by moving the wind-

vane; tilting the rain sensor to hear the impact of the internal moving seesaw,

etc. (see Positioning below).

4. Time and date shall be manually set (See Manual Setting below).

5. After the Weather Station has been checked for correct function with regard to

the above points and found fit, the initial set up of the weather station system is

finished and the mounting of the system components can take place. It must be

ensured however that all components work properly together at their chosen

mounting or standing locations. If e.g. there appear to be problems with the 868

MHz radio transmission, they can mostly be overcome by slightly changing the

mounting locations.

Note:

The radio communication between the receiver and the transmitter in the open field

reaches distances of max 100 metres, provided there are no interfering obstacles

such as buildings, trees, vehicles, high voltage lines, etc.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of La Crosse WS-1501 in the language / languages: English as an attachment in your email.

The manual is 0,54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

La Crosse WS-1501 Manual

Product: