606449
32
Zoom out
Zoom in
Previous page
1/42
Next page
2.6 INDOOR AND OUTDOOR TEMPERATURE AND HUMIDITY
The weather station supports up to 5 remote thermo-hygrometer sensors, each sensor corresponding to a separate
channel for the temperature and relative humidity display. The temperature may be shown in degrees Celsius ºC or
degrees Fahrenheit ºF. The trend (rising, steady or falling) of all values is also indicated on the display.
The main unit uses the indoor temperature and humidity data to compute a comfort level rating : Wet, Comfort or Dry.
A temperature alert function is available for each channel. It can be programmed to sound if the channel
temperature exceeds or falls below the pre-configured upper and lower limits.
Note: The temperature alerts have a 0.5 ºC hysteresis to prevent the alerts from sounding constantly due to small
fluctuations near the alert value. This means that after the temperature reaches the alert value, it will have to fall
below the alert value plus the hysteresis to desactivate the alert.
ACCESSING TEMPERATURE AND HUMIDITY FROM DIFFERENT WIRELESS OUTDOOR THERMOHYGROMETER
From the main console unit: press [] or [] until the “IN” icon on the upper right of the display starts flashing.
VIEWING TEMPERATURE AND HUMIDITY DISPLAY FOR EACH CHANNEL
For static display
:
In “Temperature and Humidity” Mode, each press of [CHANNEL] rotates display between different channels.
For cycling display
:
To enable automatic rotating between different channel displays, press and hold [CHANNEL], until the
icon is
displayed. Each valid channel will now be alternately displayed for 5 seconds.
ROTATING BETWEEN TEMPERATURE AND DEW POINT DISPLAY
Each press of [SET] rotates temperature display between:
• Temperature and Relative Humidity
• Dew Point Temperature and Relative Humidity
SETTING UNITS FOR TEMPERATURE DISPLAY (ºC OR ºF)
Press and hold [SET] to convert units between degrees Celsius ºC and degrees Fahrenheit ºF.
ACTIVATING/DESACTIVATING THE TEMPERATURE ALERTS
1. In “Temperature and Humidity” Mode, each press of [ALARM/CHART] rotates channel temperature display
between:
• Current Temperature for corresponding channel
• Upper Temperature Alert (displays OFF if deactivated): icon displayed
• Lower Temperature Alert (displays OFF if deactivated):
icon displayed
2. When the above alerts are displayed, pressing [] or [] will activate/desactivate the corresponding alert.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for La Crosse WM9280 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of La Crosse WM9280 in the language / languages: English as an attachment in your email.

The manual is 0,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info