17490
37
Zoom out
Zoom in
Previous page
1/167
Next page
Section 4 BASIC OPERATION
4-11
2A080030A
KM-6230 (KME)
/ 131
2. Change the number of copies by touching the “+” key or “-” key.
* If the copier is equipped with the optional Finisher, it is also possible to change the
Staple-Sort mode and the Hole Punch mode settings as well. If the copier is equipped
with the optional Booklet Stitcher, it is the Staple-Sort mode settings that can also be
changed.
3. Touch the “END” key to resume copying.
* The copy job will be resumed from the point it was suspended using the newly selected
settings.
(9) Energy-saving (auto preheat) function
This function allows you to save energy by simply pressing the Energy Saver key and shut-
ting down the copier, even though the main switch is still turned ON. When the auto preheat
function is engaged, the Energy Saver indicator will be the only lit indication on the operation
panel.
* To resume copying after the auto preheat function has engaged, press the Energy Saver
key once again. The time for recovery from this energy-saving state is 30 seconds or below.
* It is also possible to set the auto preheat function to engage automatically if the copier is not
used for a certain period of time. (See “7 Auto preheat time” on page 8-11.)
(10) Auto shut-off function
This function automatically turns the main switch OFF (O) if the copier is not used for a
designated period of time (between 15 and back 240 minutes). To make copies again, turn
the main switch ON ( | ).
More about the auto shut-off function
The auto shut-off function is an energy-saving function that automatically turns the main
switch OFF (O) if a designated amount of time elapses without the copier being used.
Copiers generally spend more time in a standby mode than they do in actual copying opera-
tion, and the amount of power consumed in this standby mode is a large part of the overall
power consumption of the copier. Having the copier turned OFF automatically will reduce
unnecessary power consumption while it is in this standby mode, as well as if it is left on at
night, thereby resulting in a reduction in power costs.
* To change the amount of time that will elapse before the auto shut-off function engages, see
8 Auto shut-off time” on page 8-11. To deactivate the auto shut-off function, see “0 Auto
shut-off ON/OFF” on page 8-11.
4-10
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kyocera KM6230 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kyocera KM6230 in the language / languages: English as an attachment in your email.

The manual is 6,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info