17490
25
Zoom out
Zoom in
Previous page
1/167
Next page
Section 3 PREPARATIONS
2A080030A
KM-6230 (KME)
/ 131
6 Setting originals on the platen
To make copies from originals that cannot be set in the DF (books, magazines, etc.), lift
open the DF and set one original at a time on the platen.
1. Hold the DF open/close handle and lift the DF open.
* Before opening the DF, remove any originals that are on the original table and the
original ejection table to prevent them from falling off the DF when it is opened.
2. Set the original face down on the platen and align it with original size indicator lines.
3. Hold the DF open/close handle and close the DF.
IMPORTANT!
Avoid placing excessive pressure on the platen when closing the DF. Too much pressure
on the platen may cause the glass to break.
3. Adding toner
Add toner when “ADD TONER TO RESUME COPYING.” appears in the message dis-
play.
* DO NOT add toner unless this message is displayed.
* Touch the “? TONER” key on the touch panel to display the procedure for adding toner.
5 Auto selection mode
The copier will automatically detect the size of each original and select paper of that
same size to copy onto.
POINT OF INFORMATION
A maximum of 50 originals can be set in DF at one time with this mode.
• The size of originals that can be used in this mode is limited to 11" x 17" and
11" x 8-1/2" (A3 and A4) and all originals must be of the same width.
1. Touch the “FUNCTION” key.
The function select screen will appear.
2. Touch the “AUTO SELECTION” key. (If that key is not displayed, touch the “” key or
the “” key until it is displayed.)
The touch panel will return to the basic screen.
3-5
CAUTION
DO NOT leave the document feeder open as there is a danger of personal
injury.
CAUTION
Do not incinerate toner and toner containers. Dangerous sparks may cause
burns.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kyocera KM6230 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kyocera KM6230 in the language / languages: English as an attachment in your email.

The manual is 6,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info