17480

Kyocera KM5530 Manual

222
Zoom out
Zoom in
Previous page
1/250
Next page
Section 9 TROUBLESHOOTING
9-4
Message
“Paper capacity exceeded. Remove
paper from Finisher.”
“Remove paper from inner tray of
Finisher.”
“Remove paper from Finisher.”
Check paper in Finisher. Incomplete
copies inside.
“Cannot sort this size.” [“Cannot sort
this paper size.”]
“Cannot staple. _____:maximum
capacity (Staple)”
[“Cannot staple. _____ :Max.
staples”]
“Cannot staple this paper type.”
“Cannot punch this size.”
[“Cannot punch this paper size.”]
“Cannot punch this paper type.”
“Staple jam. Remove staples.”
[“Staple jam. Remove staple(s).”]
“Check the waste punch box.”
[“Check Punch Hole box.”]
“Out of staples. Add staples.”
[“Stapler empty. Add staples.”]
“Cannot staple this size.”
[“Cannot staple this paper size.”]
“Tandem Copy is cancelled. Unable
to Tandem Copy under current
setting.” [“Cancel tandem copy.
Cannot tandem copy with the
present setting.”]
“The waste toner box almost full.”
[“The waste toner container is
almost full.”]
“The waste toner box is full.”
[“The waste toner container is full.”]
Procedure
The number of copies stored in the optional Document Finisher has exceeded the
acceptable limit. Remove the copies from the Document Finisher.
There are still copies left in the optional Document Finisher. Remove all of the copies
from the Document Finisher.
There are still copies left on the tray(s) of the optional Document Finisher or inside the
Document Finisher itself. Remove all of the copies from the Document Finisher.
There are unfinished copies among those that have been ejected into the optional
Document Finisher.
The selected paper size cannot be used in the sort/finished mode. For more detailed
information, refer to the Operation Guide for your Document Finisher.
The number of copies stapled in the optional Document Finisher has exceeded the
acceptable limit. For more detailed information, refer to the Operation Guide for your
Document Finisher.
The selected paper type cannot be stapled. Select a different type of paper.
The selected paper size cannot be hole punched. For more detailed information, refer to
the Operation Guide for your Document Finisher.
The selected paper size cannot be hole punched. Select a different type of paper.
Staples have jammed in the optional Document Finisher. Refer to the Operation Guide
for your Document Finisher and remove the jammed staples.
The hole punch chad box in the optional Document Finisher is full. Refer to the
Operation Guide for your Document Finisher and dispose of the hole punch chad.
There are no staples left in the optional Document Finisher. Refer to the Operation Guide
for your Document Finisher and load staples.
Stapling of small size paper, such as 5 1/2" x 8 1/2" and A5R, is not possible. For more
detailed information, refer to the Operation Guide for your Document Finisher.
Tandem copying (option) is not possible. Touch the “Check” key and check the copy
settings.
It is almost time to replace the waste toner box. Contact your service representative or
an authorized service center.
It is time to replace the waste toner box. Contact your service representative or an
authorized service center.
Reference
page
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
… 222 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kyocera KM5530 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kyocera KM5530 in the language / languages: English as an attachment in your email.

The manual is 8,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info