17480
221
Zoom out
Zoom in
Previous page
1/250
Next page
Section 9 TROUBLESHOOTING
9-3
Message
“Exceeds pre registered copying
quantity. [“Copy limit for this ID-
code has been reached.”]
“Ready to copy. Add toner.
“Add toner to resume copying.”
“Image cycle.” [“Now adding toner.”]
“Cannot use this paper for copying.”
“System error. Main switch off / on.
“Disconnect power plug from the
socket.”
“Call service.”
“Time for maintenance”
“Check KMAS.”
“Time for replacing Felt Roller.
[“Felt cleaning maintenance.”]
“Call for service to replace Felt
Roller.” [“Change felt clean.-(F.unit)”]
“Insert key counter.
“Memory full.”
“Paper misfeed. Remove paper.
“Attach Side Paper Deck to
Mainframe.”
[“Attach side feeder to main frame.”]
“Paper capacity exceeded. Remove
paper from Side Paper Deck.”
[“Paper capacity exceeded. Remove
paper from side feeder.”]
“Finisher is out of order. Press
“Continue” to resume job”
Procedure
The number of copies made under your department ID-code has reached the limit that
was set under the copy management mode and copying is no longer possible with that
code. Use the copy management mode to clear the copy count.
There is insufficient toner left in the copier. Since only one copy can be made at a time in
this state, add toner as soon as possible.
There is insufficient toner left in the copier to make copies. Add toner immediately.
Toner is now being added. Please wait until the operation is complete.
Copying is not possible at the currently selected sizes.
An error has occurred. Turn the main switch OFF (O) and then back ON ( | ) again.
An error has occurred. Remove the power plug from the outlet.
Open and then close the front cover. If this message still remains, make a note of the
number that displayed with the “C”, turn the main switch OFF (O), remove the power
plug from the outlet and contact your service representative or authorized service center.
Periodic maintenance is required to keep your copier in good condition. Contact your
service representative or authorized service center as soon as possible.
An error has occurred. Contact your service representative or authorized service center.
It is time to replace certain parts in your copier. Contact your service representative or
authorized service center.
It is time to replace certain parts in your copier. Contact your service representative or
authorized service center.
Insert the Key Counter securely into its opening.
The copier's memory is full. Select whether you want to print out that data that is already
scanned or delete all of that data. It will not be possible to copy or scan another original
until one of these two operations is performed.
If paper misfeeds, the location of the misfeed will be indicated on the touch panel. Leave
the main switch ON ( | ) and follow the appropriate procedure to remove the jammed
paper.
Attach the optional Side Feeder securely to the copier.
The number of sheets of paper loaded in the optional Side Feeder has exceeded the
acceptable limit. Load paper only up to the acceptable limit.
The optional Document Finisher is out of order and cannot be used for the moment.
Contact your service representative or an authorized service center as soon as possible.
Reference
page
7-8
3-8
3-8
8-7
9-6
3-5
221


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kyocera KM5530 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kyocera KM5530 in the language / languages: English as an attachment in your email.

The manual is 8,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info