* The hole punching position will be displayed on the image of the finished copies that appears in the touch panel, as shown in the illustration below.
Verify the number and position of the holes before copying. When the combination of the selected functions does not allow hole punching, the hole
marks will not appear on the displayed image.
Inch specificationsMetric specifications
IMPORTANT!
The position of the holes on each page may differ very slightly. This
may be especially true if the automatic drawer[cassette] switching
function engages and changes to paper feed from a different
drawer[cassette].
4
Set the originals to be copied.
Verify the direction in which the originals were set.
5
Press the [Start] key.
Scanning of the originals will start and the number of
originals that was set will be displayed.
NOTE
If you do not set the originals in the Document Processor, perform the
appropriate procedure to set all of the originals to be copied.
6
Once all of the originals have been completely scanned,
touch the “Scanning finished” key. Copying will start and
each finished copy will be automatically hole punched and
ejected onto the Finisher.
7
Once copying is completed, removed the finished copies
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Kyocera KM5530 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Kyocera KM5530 in the language / languages: English as an attachment in your email.
The manual is 8,58 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
