17466
257
Zoom out
Zoom in
Previous page
1/292
Next page
Section 8 OPTIONAL EQUIPMENT
8-11
22
22
2 Clearing a staple jam
1
Remove the staple cartridge referring to the “1 Refilling the
Stapling Unit”.
Push up on the tab “A” on the protective faceplate in order to
raise the faceplate.
2
Remove the jammed staple from the tip of the staple
cartridge (the end where staples are set).
3
Lower the protective faceplate back into its original position.
4
Replace the staple holder back in its original position in the
Stapling Unit. Once it has been fully inserted, it will click into
place.
5
Lift up the Stapling Unit slightly and than lower it into its
original position.
6
Close the stapler front cover securely.
(8) Job Separator
When using the optional printer function, the paper eject point can be
changed according to the used function, making it easier to sort
paper.
Copied paper can be ejected to the Job Separator (upper section).
See “Copy eject location” in Machine default setting on page 7-49.
* The Job Separator can store up to 100 copies. When making 101 or
more copies, copying will stop when 100 copies are made. Copying
will resume automatically when the copied sheets are removed.
(9) Hard Disk
The Hard Disk is required in order to use the following modes and
functions of your copier.
Job reservation during copying
Form overlay of registered forms
Repeat copying
Document management functions
Using the output management functions to change the job printing
order, cancel and delete print jobs, and verify content
It is also possible to register up to 1000 department ID-codes under
document management.
A
257


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kyocera KM3035 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kyocera KM3035 in the language / languages: English as an attachment in your email.

The manual is 6,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info