17458
61
Zoom out
Zoom in
Previous page
1/74
Next page
CHAPTER 8 WHEN A PROBLEM OCCURS
8-2
8-3
8-6
"TIME FOR MAINTENANCE"
Periodic maintenance is necessary to keep your copier in good condition.
Contact your service representative as soon as possible.
"MEMORY IS FULL." The copier memory if full. Either print out or clear all scanned data. It is not
possible to copy or scan another original until one of these two operations is
performed.
"PAPER MISFEED." If paper is misfed, the copier will stop and the location of the misfeed will
appear on the message display. Remove the misfed paper with the main switch
turned ON (|) by following the appropriate procedure.
"REMOVE ORIGINAL FROM FEEDER."
"MISFEED IN FEEDER. REMOVE
ORIGINAL(S)."
Originals have not been fed correctly from the DF (optional). Remove the
originals with the main switch turned ON (|) by following the appropriate
procedure.
"DUPLEX UNIT IS OUT OF ORDER. 1-SIDED
COPYING IS POSSIBLE."
The duplex unit (optional) is out of order and duplex copying is not possible.
Contact your service representative immediately.
"INSTALL FINISHER."
The finisher (optional) is not installed correctly. Install it securely.
"CHECK PAPER IN FINISHER. INCOM-
PLETE COPIES INSIDE."
Unfinished copies were ejected onto the finisher (optional) due to a problem
occurred during copying. Check and remove those copies.
"FINISHER IS OUT OF ORDER. DETACH
FINISHER."
The copier is inoperable due to a problem in the finisher (optional). Contact
your service representative immediately.
"PAPER CAPACITY EXCEEDED. REMOVE
PAPER FROM FINISHER."
The number of sheets in the finisher (optional) exceeded the capacity. Remove
the excess sheets.
"REMOVE PAPER FROM INNER TRAY OF
FINISHER."
Paper has been misfed inside the finisher (optional). See the finisher's
instruction handbook and remove the paper.
"REMOVE PAPER FROM SUB TRAY OF
FINISHER."
Paper has been misfed at the sub-tray of the finisher (optional). See the
finisher's instruction handbook and remove the paper.
"STAPLER EMPTY. ADD STAPLES." There are no staples in the finisher (optional). See the finisher's instruction
handbook and replace the staple cartridge.
"CANNOT STAPLE THIS PAPER SIZE." Stapling is not possible with small size paper. For details, see the finisher's
instruction handbook.
Message Action
Page
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kyocera KM2030 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kyocera KM2030 in the language / languages: English as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info