17456
44
Zoom out
Zoom in
Previous page
1/124
Next page
Section 5 COPY FUNCTIONS
5-6
Standard Margin
[Inch specifications]
The position of the image of the original is shifted for copying and a
0.13/0.25/0.38/0.50/0.63/0.75 (") (1/8-inch increments) width
binding margin created.
[Metric specifications]
The position of the image of the original is shifted for copying and a
1 to 18 mm (1 mm increments) width binding margin created.
Note
If the left width of the Binding Margin is set when
setting the 2-Sided Copy, the right side of the Binding
Margin will be set automatically for the reverse side by
the 2-sided copy rotational setting in the case where it is
rotated.
1 Set the original.
IMPORTANT!
Place the original so that the side to be set for the Margin
shift is on the right side (on the left side, in the case of
the optional Document Processor) and check its position
after setting it. If the original is placed in the wrong
direction, the Binding Margin will not be produced in the
position set.
Note
The Binding Margin can also be set in the Default
Settings Mode. (Refer to P.6-25 "Margin Shift".)
The value set in the Default Setting Mode will inherit the
value that is set at the time when the copy is made.
2 Press the [Margin] key.
The Margin Shift display will light up.
3 Press the [Start] key.
The copier will begin copying.
Setting the Margin
Use the procedure given below to change the Margin.
1 Press the [Margin] key for 3 seconds. The Default Settings
Mode for the Margin will be displayed.
Making a margin space on the copies
Original Copy
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kyocera KM2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kyocera KM2020 in the language / languages: English as an attachment in your email.

The manual is 10,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info