17454
39
Zoom out
Zoom in
Previous page
1/54
Next page
CHAPTER 7 WHEN A PROBLEM OCCURS
7-2
Indication
“A” and “011” alternate on the copy quantity
display.
“A” and “040”, “041” or “043” alternate on the
copy quantity display.
The Add Toner indicator flashes.
“AP” appears on the copy quantity display.
“PF” appears on the copy quantity display.
“E07” appears on the copy quantity display.
“E30” appears on the copy quantity display.
Action
An error message will automatically be printed out. Turn the main switch OFF
and ON.
If this indication appears, the copier initializes the data to remedy the error. Make
the specifications setting (F29 Inch/metric specifications setting) before using the
copier again.
If the same indication appears again, print a user status report and contact your
service representative with the details on the report.
The error message is as follows:
“Default data was initialized. Need initial setting to use the machine. Input F29:
User Code. cf. User manual.”
When you installed the memory copy board/DIMM, it was not installed correctly.
Check the installation of the memory copy board/DIMM and turn the main switch
OFF and ON. If the same indication appears when the memory copy board/
DIMM is installed correctly, remove the memory copy board/DIMM, print a user
status report and contact your service representative with the details on the
report.
Copying is still possible for some time with the indicator flashing but it will
eventually be disabled. Replace the toner container and waste toner tank as
soon as possible.
Toner is being replenished inside the copier. Wait a few minutes.
* Although the lamp under the platen may remain lit while “AP” is displayed, it is
not a problem.
A paper misfeed occurred in the drawer of the flashing indicator. Remove the
misfed paper.
The drawer of the flashing indicator is not inserted correctly. Close the drawer
securely.
There is no paper in the drawer of the flashing indicator. Load paper.
The set paper size is different from that of the paper used. Check the paper size
setting and the actual paper size, and set the paper size to the size of the actual
paper or use a paper of the set size.
Installation may not have been performed correctly. Install the copier again by
referring to the installation manual.
Page
6-6
6-7
6-1
6-7
3-7
––
7-4
3-1
3-3
6-2
6-3
6-7
––
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kyocera KM1810 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kyocera KM1810 in the language / languages: English as an attachment in your email.

The manual is 1,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info