495637
122
Zoom out
Zoom in
Previous page
1/150
Next page
Troubleshooting
9-2 OPERATION GUIDE
If other trouble occurs
Check the following items when trouble occurs. If the problem is not
resolved after checking these items, contact your service representative.
Symptom Items to Check Corrective Procedure
Reference
Page
Nothing displays on
the Operation Panel
even though the
Power Switch is ON.
Check to make sure the copier is
plugged into the outlet.
Plug the copier power cord into
the outlet.
No copy is produced
when [Start] is
pressed.
Check to see if something has
been displayed on the Operation
Panel.
Check the corrective procedure
for the error display and carry it
out.
9-5
Nothing appears on
the copy.
Check to see that the original
has been set properly.
Place the original face down on
the platen and adjust the Original
Size Indicator Plate to match its
size.
Place the original face up when
setting it in the optional
Document Processor.
3-2
7-3
A light copy is
produced.
Check to see if the copier is in
Auto Exposure Mode.
When the exposure is to be
changed overall, perform out the
“Auto Exposure Adjustment”.
5-11
Check to see if the copier is in
Manual Exposure Mode.
Use Exposure Adjustment to set
the proper exposure.
3-3
When the exposure is to be
changed overall, perform the
Manual Exposure Adjustment in
each original mode.
3-3
Check to see if the toner in the
toner container is canted.
Shake the Toner Container left
and right for approximately 10
times.
8-8
Check to see if the Add Toner
Indicator is lit.
Replace the Toner Container. 8-5
Check to see if the paper is
damp or not.
Replace the paper with new
paper.
Check to see if the electrical
charge section is dirty or not.
Open the front cover and use the
Cleaning Rod to clean the
electrical charge section.
8-7
122


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kyocera KM1635 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kyocera KM1635 in the language / languages: English as an attachment in your email.

The manual is 3,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info