17448
37
Zoom out
Zoom in
Previous page
1/58
Next page
CHAPTER 6 COPIER MANAGEMENT
6-6
Default code Setting item Setting contents Setting code
F13
Non-standard size paper width
setting for multi-bypass
Sets the paper width for the multi-bypass to use non
standard size paper such as A4 paper.
F14
Output mode Select "Sort ON" to have sorting performed automatically
when the ADF is used. If "Sort OFF" is selected, sorting will
not be performed. To use the sort mode when "Sort OFF" is
selected or when placing originals on the platen, press the
Sort key to light the Sort indicator.
* This setting item will not be displayed if the optional
memory board and ADF are not installed.
1: Sort ON
*
2: Sort OFF
F15 Rotate sort Sets whether the normal sort copy (see page 5-6) or rotate
sort copy (see page 5-6) is used when the sort mode is
selected.
* This setting item will not be displayed if the optional
memory board is not installed.
1: ON
*
2: OFF
F16 Copy limit Limits the number of copies that can be made at a time.
1 to 250 copies (250
copies
*
)
F17 Margin width Sets the initial value of the margin width for the margin copy
mode (see page 5-1).
* This setting item will not be displayed if the optional
memory board is not installed.
1 mm ~ 18 mm (6 mm
*
)
F18 Border width Sets the initial value of the border erase width for the Sheet
Erase or Book Erase in the border erase mode (see page
5-2).
* This setting item will not be displayed if the optional
memory board is not installed.
1: 6 mm
*
2: 12 mm
3: 18 mm
F19 Layout (4 in 1) Sets whether to place the originals vertically or horizontally
for 4 in 1 layout copying (see page 5-4).
* This setting item will not be displayed if the optional
memory board is not installed.
1: Vertical (Z)
*
2: Horizontal (N)
F20 Layout (borderline) Selects the type of borderline for layout copying (see page
5-4).
* This setting item will not be displayed if the optional
memory board is not installed.
1: None
*
2: Solid line
3: Dotted line
F21 Transparency mode When coping onto transparencies or thick paper using the
multi-bypass, select the paper type using this setting.
1: Transparencies
*
2: Thick paper
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kyocera KM1530 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kyocera KM1530 in the language / languages: English as an attachment in your email.

The manual is 2,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info