17446
28
Zoom out
Zoom in
Previous page
1/44
Next page
CHAPTER 5 COPIER DEFAULT SETTING
Default code
F17
F18
F19
F20
F21
F22
F23
F24
Setting item
Viewing total counter value
Toner counter report
Toner replacement message
output setting
Paper feed shifting adjustment
Paper feed shifting adjustment
(multi-bypass)
Inch/metric specifications setting
Folio length setting (drawer)
Folio length setting (bypass)
Setting code
1: ON*
2: OFF
-3.0 to 3.0 (0*) in increments
of 0.1
-3.0 to 3.0 (0*) in increments
of 0.1
1: Inch
2: Metric
3: Metric (Japan)
1: 210 mm*
2: 216 mm
200 to 216 mm (210 mm*)
Setting contents
Displays the total number of copies made.
The total number of copies are displayed on the copy
quantity display three digits at a time.
Example
When the total number of copies is 1,234
“---” R “001” R “234”
* The total counter value can also be checked in the
following way:
1 Hold down the Stop/Reset key for 5 seconds.
2 The total counter value is displayed.
Prints a report on the toner consumption ratio.
Using this toner consumption ratio, you can manage
when the toner container needs replacing. If the toner
consumption ratio is very high, it is recommended to
combine the use of the economy mode (page 4-1) with
the regular use.
When the toner is used up and toner container
replacement is required, a message requesting the user
to replace the toner container will be printed. Select
“OFF” when not printing the message.
Adjusts displacement of the copy image.
Adjusts displacement of the copy image.
* Be sure to use 8 1/2" x 11" (letter)/A4 paper.
Switches the copier specifications setting between inch
and metric.
* Since the specifications setting is made at the factory,
it is not necessary to make this setting under normal
circumstances.
* If "A" and "011" alternate on the copy quantity display,
the copier initializes the data to remedy an error. If this
occurs, make the specifications setting.
When folio is selected as the paper size, this sets the
length of folio.
* This setting item is available only when metric is
selected for the copier specifications.
When folio is used, this sets the length of folio.
* This setting item is available only when metric is
selected for the copier specifications.
5-4
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kyocera KM1505 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kyocera KM1505 in the language / languages: English as an attachment in your email.

The manual is 0,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info