Manual Kyocera KM1500 (page 20 of 92) (English)

17442

Zoom out

Zoom in

1/92

Section 2 NAMES OF PARTS

2-4

(1) Start key & indicator

(Press this key when you want to start copying. Copying will

begin immediately if you press this key when the indicator is

lit green.)

(2) Reset/Power key

(Press this key when you want to cancel the currently entered

setting(s) and return to those registered for the initial mode.

Press down on this key for at least 3 seconds when you want to

engage the Off mode. When you want to release the copier

from the Off mode, press any one of the keys on the operation

panel. See page 2-5 for details on the initial mode and

page 4-7 for details on the Off mode.)

(3) Stop/Clear key

(Press this key when you want to stop copying. Press down on

this key for at least 3 seconds when you want to view the total

copy count. See page 6-11.)

(4) Copy quantity/magnification display

(Displays the number of copies to be made or the currently

selected magnification ratio. When the “%” symbol is lit, the

displayed number is the currently selected magnification

ratio.)

(5) Exposure adjustment keys

(Press the left key when you want to make the copy exposure

lighter and the right key to make the exposure darker. Press

down on both keys at the same time for at least 3 seconds

when you want to access the default settings mode.)

(6) Image quality select key

(Press this key when you want to select the desired image

quality mode. See page 4-1.)

(7) Number of Copies / Zoom(+) key

(Press this key when you want to raise the number of copies to

be made, as well as to increase the currently selected copy

magnification ratio. Press this key as well during default

settings in order to select the desired default item or setting.)

(8) Number of Copies / Zoom(-) key

(Press this key when you want to lower the number of copies

to be made, as well as to decrease the currently selected copy

magnification ratio. Press this key as well during default

settings in order to select the desired default item or setting.)

(9) Recall%/Enter key

(Press this key when you want copy in the Zoom mode. Press

this key as well during default settings in order to select the

current default item or register the currently displayed

setting. See page 4-4.)

(10) Reduce/Enlarge key

(Press this key when you want to use the Preset Zoom mode.

See page 4-5.)

(11) Paper Select key

(Press this key when you want to switch paper feed between

the drawer(s) and the multi-bypass tray. The indicator for the

currently selected source of paper feed will be lit green. Press

down on this key for at least 3 seconds when you want to

access the default items for paper size selection. See page 4-1.)

(12) Thick Paper key & indicator

(Press this key when you want to copy onto thick paper. Make

sure that the Thick Paper indicator is lit green. See page 3-9.)

(13) 2in1/4in1 key & indicator

(Press this key when you want to copy with the Layout modes.

Make sure that the 2in1 or the 4in1 indicator, as appropriate,

is lit green. Press down on this key for at least 3 seconds when

you want to access the default items for the Layout modes. See

page 5-1 for more information on the Layout modes.)

Operation panel

(1)

(2)

(3)

(14)

(15)

(10)(7)(9)(8)(11)(5)(6)

(13)

(16)

(4)(17)(12)

(24)

(23)

(19)

(21)

(22)

(18)

(20)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kyocera KM1500 in the language / languages: English as an attachment in your email.

The manual is 5,32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kyocera KM1500 Manual

Product: