20433
94
Zoom out
Zoom in
Previous page
1/143
Next page
Appendix B Expansion Memory
B-2
Q
QQ
Q DIMMs to be used
See your Kyocera Mita dealer for purchasing information of the
DIMMs that are best suited for use with this printer. 16 MB, 32
MB, 64 MB, and 128 MB DIMMs can be used for memory ex-
pansion.
Insert the DIMM into the socket as shown below.
Remove the DIMM from its package.
Open the clips on both ends of the DIMM socket.
Insert the DIMM into the socket, so that the notches on
the DIMM align with the corresponding protrusions in
the socket.
Close the clips of the DIMM socket to secure the
DIMM.
When you finish installing the DIMM, reinsert the main
circuit board into the printer by reversing the removal
procedure.
To remove a DIMM, carefully pull the end clips outwards, then
pull the DIMM out of the socket.
Return the main circuit board to the printer by reversing the pro-
cedure explained in Removing the Main Circuit Board from the
Printer on page B-1.
After you finish installing DIMMs in the printer, test the printer to
see if the installation was successful. To test the expansion
memory, proceed as follows:
Make sure the printer is turned off. Plug the power cord
into the printer and turn the printer on.
Press the
MENU
key on the operator panel.
Press the 3 or 4 key repeatedly until Print Status
Page appears.
Press the ENTER key twice.
If the installation was successful, the amount of memo-
ry shown on the status page will correspond with the
amount of expanded memory. (The factory installed
memory size is 32 MB.)
2. Installing DIMMs
1
2
3
4
5
2.1 Removing DIMM
2.2 Testing the Expansion Memory
1
2
3
4
5
94


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kyocera FS9500DN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kyocera FS9500DN in the language / languages: English as an attachment in your email.

The manual is 5,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info