20433
72
Zoom out
Zoom in
Previous page
1/143
Next page
Chapter 4 Troubleshooting
4-4
The tables on the following pages indicate how to respond to problems indicated by the operator panel indicators and messages.
The following table lists maintenance messages that you can deal with by yourself. If Call service person appears, turn off the
printer, disconnect the power cord, and contact your Kyocera Mita dealer.
3. Indicators and Messages
3.1 Indicators
Indicator Condition Description
Flashing An error occurs that you can clear by yourself.
Lit The printer is on-line. The printer is ready to print.
Off
The printer is off-line. The printer stores but does not print received data. Also indicates when
printing is automatically stopped due to occurrence of an error.
Flashing Data transfer is taking place.
Lit Either data is being processed, or data is being written onto the option memory card or hard disk.
Flashing The printer needs maintenance attention or the printer is warming up (Please wait).
Lit A problem or an error occurs that you can clear by yourself. (For example, a paper jam occurs.)
Off Operations are normal.
3.2 Maintenance Messages
Message Corrective Action
Add paper (paper
source)
The paper has run out. Supply paper according to the paper source displayed (paper cassette, MP
tray, or optional paper feeder).
Messages indicating the printer status (Ready, Please wait, Processing*, Waiting, and
FormFeed Time Out*) are displayed alternately.
* These messages will not appear when the number of copies is set to 2 or more.
Add staples No staples are installed in the stapler. Set it in the stapler.
Call service
####:0123456
#### represents a mechanical error (#=0, 1, 2, ...). Call for service.
The printer does not operate when this message is displayed.
The total number of pages printed is also indicated, e.g.
0123456.
Call service
F###:
F### represents a controller error (#=0, 1, 2, ...). Call for service.
The printer does not operate when this message is displayed.
Call service
person F0
This message means an error in data communications between the printer controller and the operator
panel. Call for service.
The printer does not operate when this message is displayed.
Chad box full The punch unit chad box of the option document finisher is full. Discard the chads.
Check chad box
Press GO
The punch unit waste box of the DF-70 document finisher is full or is not installed correctly. Check if the
box is properly installed, and then discard the chads if the box is full. Press the GO key to resume
printing.
Clean printer
Press GO
Clean the inside of the printer. See Toner Container Replacement on page 6-1.
This message will be displayed when replacing the toner container after the message Replace
toner Clean printer is displayed. After cleaning the inside of the printer, press the GO key and
the printer will be ready for printing.
Close finisher
cover
Close the option document finisher cover.
READY
DATA
ATTENTION
72


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kyocera FS9500DN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kyocera FS9500DN in the language / languages: English as an attachment in your email.

The manual is 5,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info