20433
52
Zoom out
Zoom in
Previous page
1/143
Next page
Chapter 3 Using the Operator Panel
3-36
Repeat above steps until you have transferred all data
(files) that you want to write to the RAM disk. Each time
you finish writing data, a RAM disk write information
page is printed from the printer showing the information
explained in step 8 above, but pertaining only to the
data just written. To see all data contained in the RAM
disk at once, print a list of data names as explained.
See Printing a List of Data Names on page 3-33.
Deleting Data
It is possible to use the printer to delete data from a RAM disk
one by one. To delete data from a RAM disk, proceed as follows.
Check that the RAM disk contains data. Otherwise, the >De-
lete Data will not appear on the message display.
Press the
MENU
key.
Press the 3 or 4 key repeatedly until RAM Disk
Mode > appears.
Press the 2 key.
Press the 3 or 4 key repeatedly until >Delete Data
appears. The data name also appears.
Press the ENTER key. A blinking question mark (?) ap-
pears before the data name.
Press the 3 or 4 key to display the desired data name.
Press the ENTER key. Processing appears and the
data is deleted from the RAM disk. The message dis-
play returns to Ready.
Printing a List of Data Names
The printer prints a list of all data names (referred to as parti-
tions) stored in a RAM disk for reference. (Printing a list is also
available for a font card.) To print a list of data names for the
RAM disk, proceed as follows.
Press the MENU key.
Press the 3 or 4 key repeatedly until RAM Disk
Mode > appears.
Press the 2 key.
Press the 3 or 4 key repeatedly until >List of Par-
titions appears.
Press the
ENTER
key. A question mark (?) appears.
Press the
ENTER
key. Processing appears and the
printing of the list starts.
See Printing a List of Data Names on page 3-33 for
details on device information.
2.2.11 Operating a Memory Card
The printer is equipped with a slot for a memory card. By insert-
ing a memory card into the printer, the following operations be-
come available. For details about the handling of the memory
card, see Appendix D Option Units.
• Reading font data
• Reading data
• Writing data
• Deleting data
• Formatting memory card
• Printing of list of partitions
RAM Disk Mode >
On
>Delete Data
DataH001
>Delete Data
?DataH001
9
1
2
3
4
5
6
7
RAM Disk Mode >
On
>List of
Partitions
>List of
Partitions ?
1
2
3
4
5
6
Partition Information
Device Information
PARTITION LIST
FS-9500DN Page Printer
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kyocera FS9500DN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kyocera FS9500DN in the language / languages: English as an attachment in your email.

The manual is 5,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info