20433
29
Zoom out
Zoom in
Previous page
1/143
Next page
Chapter 3 Using the Operator Panel
3-13
Press the 4 key repeatedly until Delete appears be-
low the title.
Press the ENTER key. The stored quick copy job is de-
leted.
Using Proof-and-Hold
When you print multiple copies, this mode first prints one copy
so that you can proof it before continuing to print the remaining
copies. Since you can proof the printouts before printing the re-
maining copies, wastage of paper can be reduced.
The printer prints one copy and, at the same time, saves the print
job on the hard disk. You can also change the number of copies
when resuming printing from the operator panel.
When the printer is turned off, all stored jobs will be deleted.
Q
QQ
Q Printing Remaining Copies of a Proof and Hold Job
Printing a Proof-and-Hold job on the operator panel is similar to
printing a quick copy job. To print remaining copies of a job held
in the printer:
Press the MENU key.
Press the 3 or 4 key repeatedly until e-MPS > ap-
pears.
Press the 2 key.
Press the 3 or 4 key repeatedly until >Quick Copy
appears followed by the user name (Harold, in this
example). The user name is assigned at printing using
the printer driver.
Press the ENTER key. A blinking question mark (?) ap-
pears before the user name.
Press the 3 or 4 key to display the desired user name,
Arlen, in this example.
Press the
ENTER
key. The job name entered in the
printer driver (Report, in this example) appears with a
blinking question mark (?) before the letters.
Press the 3 or 4 key to scroll to the desired job title.
Press the ENTER key. The number of copies to be
printed can be set. To increase the copy count, press
the 3 key; to decrease the copy count, press the 4
key.
Press the ENTER key to finalize the copy count. The
printer prints the specified number of copies for the job.
Printing a Private Job
In private printing, you can specify that a job is not printed until
you release the job from the operator panel. At sending the job
from the application software, you can specify a 4-digit access
code in the printer driver. The job is released for printing by en-
tering the access code on the operator panel. Thus, this function
ensures confidentiality of the print job.
When the printer is turned off, all the print jobs will be deleted.
Q
QQ
Q Releasing a Private Job
Press the
MENU
key.
Press the 3 or 4 key repeatedly until e-MPS > ap-
pears.
Press the 2 key.
Press the 3 or 4 key repeatedly until >Private/
Stored appears. The name entered in the printer driver
(Harold, in this example) also appears.
Press the ENTER key. A blinking question mark (?) ap-
pears before the user name.
>Report
Delete _
e-MPS >
>Quick Copy
Harold
>Quick Copy
?Harold
>Quick Copy
?Arlen
3
4
1
2
3
4
5
6
>Arlen
?Report
>Report
Copies 001
e-MPS >
>Private/Stored
Harold
>Private/Stored
?Harold
7
8
9
10
1
2
3
4
5
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kyocera FS9500DN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kyocera FS9500DN in the language / languages: English as an attachment in your email.

The manual is 5,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info