20433
18
Zoom out
Zoom in
Previous page
1/143
Next page
Chapter 3 Using the Operator Panel
3-2
The following indicators light up during normal operation and
when the printer needs attention.
The message display gives information in the form of short mes-
sages. The eight messages listed below are displayed during
normal warm-up and printing.
Other messages that may appear when the printer needs the op-
erator’s attention are explained on page 4-4.
The interface Indicator shows the interface that is currently used.
It uses the following abbreviations:
PAR
Standard bi-directional parallel interface
SER Serial interface (RS-232C)
NET Network interface
OPT
Option network interface card
--- No interface is active.
Each interface has a timeout time of 30 seconds during which
the other interface should wait to receive a print job. Even if a
print job has been completed on the interface, you should wait
for this period until the other interface begins printing the job.
1.1 Operation Indicators
Indicator Description
Flashing: Indicates when an error occurs
that you can clear by yourself.
Lit: Indicates that the printer is on-line.
The printer prints received data.
Off: Indicates that the printer is off-line.
Data can be received but will not be printed.
Also indicates when printing is automatical-
ly stopped due to occurrence of an error.
Flashing: Indicates data transfer is taking
place.
Lit: Indicates either that data is being proc-
essed, or that data is being written to the
memory card.
Flashing: Indicates when the printer needs
maintenance attention or the printer is
warming up (Please wait).
Lit:
Indicates when a problem or an error
occurs that you can clear by yourself. (For
example, paper jam occurs.)
1Flashing: Indicates when no paper is de-
tected.
Fast-Flashing:
Indicates that a paper
jam is occurring.
Lit:
Indicates that the MP tray is select-
ed.
2Flashing:
Indicates when the cassette or
paper is not detected, or when the paper
is loading.
Fast-Flashing:
Indicates that a paper
jam is occurring.
Lit:
Indicates that the cassette is select-
ed.
3Flashing:
Indicates that there is paper
jam in the optional finisher.
Lit: Indicates that the document finisher
is being selected.
READY
DATA
ATTENTION
1
2
3
1.2 Message Display
Message Meaning
Self test The printer is self-testing after power-up.
Please wait The printer is warming up and is not
ready. When the printer is switched on for
the first time after the toner container is
installed, (Adding toner) also appears.
Ready The printer is ready to print.
Processing The printer is receiving data, generating
graphics, reading a memory card/hard
disk, or printing.
Sleeping The printer is in Sleep mode. The printer
wakes from Sleep mode whenever a key
on the operator panel is pressed, the cov-
er is opened or closed, or data is re-
ceived. The printer then warms up and
goes online. The time that the printer
takes to enter Sleep mode depends on
the Sleep Timer setting.
Cancelling data
Jobs inside the printer are being can-
celed. To cancel a job, see the table on
page 3-3.
Waiting The printer is waiting for the end-of-job
command before printing the last page.
Pressing the GO key allows you to obtain
the last page immediately.
FormFeed TimeOut
The printer is printing the last page after
a waiting period.
1.3 Interface Indicator
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kyocera FS9500DN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kyocera FS9500DN in the language / languages: English as an attachment in your email.

The manual is 5,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info