20411
38
Zoom out
Zoom in
Previous page
1/248
Next page
3.1 Understanding the Operator Panel
3-3
Error codes
See Chapter 5 Troubleshooting.
3.1.2 Indicators in Message Display
Figure 3-2
Interface Indicator (INTERFACE)
The interface indicator shows the interface that is currently in use:
Each interface has a timeout time of 30 seconds during which the other interface should wait to
receive a print job. Even a print job has been complete on the interface, you should wait for
this period until the other interface begins printing the job.
Please wait
(Calibrating)
The color calibration function is being performed automati-
cally as you powered on the printer.
You can also execute this function manually on the operator
panel. For details, see Section 3.11.4 Color Calibration on
page 3-100.
Ready The printer is ready to print.
Processing The printer is receiving data to print. This is also shown when
the printer is reading a memory card or hard disk.
Sleeping The printer is in sleep mode. The printer wakes from sleep
mode whenever a key on the operator panel is pressed, the
cover is opened or closed, or a print job is received. The printer
then warms up and goes on-line. For details on sleep mode, see
Section Sleep Timer Timeout Time on page 3-107.
Cancelling data Jobs inside the printer are being canceled. To cancel a job, see
Section 3.1.3 Keys on page 3-6 .
Waiting The printer is waiting for the rest of print job before complet-
ing the last page. Pressing the GO key allows you to obtain the
last page immediately. See below.
FormFeed TimeOut The printer is printing the last page after a waiting period.
Message Meaning
Table 3-1 (Continued)
PAR Parallel interface is in use.
SER Serial (RS-232C) interface is in use.
OP1 (2) Network interface is in use.
--- No interface is in use.
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kyocera FS8000C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kyocera FS8000C in the language / languages: English as an attachment in your email.

The manual is 5,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info