20411
29
Zoom out
Zoom in
Previous page
1/248
Next page
2.2 Selecting the Right Paper
2-4
2.2 Selecting the Right Paper
To get clean, crisp printouts from laser printers all the time, select high-quality printer paper
that meets the printers requirements. Laser printers use laser beams, electrostatic discharge,
toner, and heat, all of which affect the paper. Furthermore, paper slide, bends, and twists as
it passes through laser printers during printing. Therefore, printer paper must be able to
withstand such great stress.
This section describes the major considerations for selecting the right printing paper.
2.2.1 Guidelines
Paper conditions
Do not use paper with folded edges, curls, warps, smudges, tears, or embossing. Also do
not use paper containing lint, clay, or paper debris. Using such paper may cause illegible
printing, misfeeds, paper jams, etc., and shorten the product life of the printer. Never use
paper with surface coating or other surface treatment. The paper surface should be as
smooth and even as possible.
Paper composition
Do not use paper with surface-coating or containing plastic or carbon. The heat of fusing
causes such paper to emit toxic fumes.
Bond paper should have at least an 80 % pulp content. The percentage of cotton and other
fibers should not exceed 20 %.
Paper sizes
Table 2-3 lists the standard paper sizes and dimensions. Note that certain paper sizes are
available only for MP tray feeding (as remarked) and face-up tray delivering. For details on
using MP tray, see Chapter 3 Using the Operator Panel, section 3.10.1 MP Tray Mode on
page 3-77.
The dimensional tolerances for these paper sizes are
±
0.7 mm (
±
0.0276 inches) for both
length and width of paper. The corner angles must be 90
±
0.2
°
.
Paper Size Dimensions Remarks
Ledger
11
×
17 inches
Legal
8-1/2
×
14 inches
Letter
8-1/2
×
11 inches
ISO A3
297
×
420 mm
ISO A4
210
×
297 mm
ISO A5
148
×
210 mm
JIS B4
257
×
364 mm
Table 2-3
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kyocera FS8000C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kyocera FS8000C in the language / languages: English as an attachment in your email.

The manual is 5,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info