20377
102
Zoom out
Zoom in
Previous page
1/110
Next page
Appendix A Host Computer Interface
A-5
Obtaining a Suitable RS-232C Cable
Make sure that the RS-232C cable is wired correctly. The cable
must be a null modem cable; that is, one in which pin 2 on
either end of the cable is connected to pin 3 on the other end.
You cannot use a straight cable such as IBM communication
adapter cable type 1502067 unless you purchase a null modem
adapter.
Connecting the Printer to the Computer
Check that the power of both the printer and the computer is
switched off.
Discharge yourself of static electricity by touching a
metal object such as a door knob.
Remove the plastic cap from the printers RS-232C
interface connector.
Plug the printer end of the RS-232C interface cable
into the printers RS-232C connector and screw it in
place.
Plug the other end of the cable into the computers
RS-232C interface connector.
Switch on the printer’s power.
The printers RS-232C parameters are factory-set to
the following values:
Baud rate=9600 bps, data bits (character length)=8
bits, stop bits=1, parity=none
The two RS-232C protocols are XON/XOFF and
DTR. The printer performs both of them
simultaneously, using positive logic for DTR.
If you are uncertain as to the printers current
parameter settings, you can reset them to the values
listed above. See
Changing Serial Interface
Parameters on page 1-43
.
Set the computer to the same parameters as the
printer. On many computers this can be done by set-
ting DIP switches before the power is turned on. An-
other method is as follows:
With Windows XP, make settings as follows:
Click on the Start button in the Windows XP task
bar and align the cursor with Settings, then click on
Control Panel from among the items displayed.
The Control Panel window opens. Double click on
System.
System Properties window opens. Click on the
Hardware tab, then click on the Device Manager
button, and double click on Ports (COM & LPT).
Double click on Communications Port.
The Communications Port Properties dialog is dis-
played for the selected COM port. Click on the Port
Settings tab and set the port properties.
After setting the properties, click the OK button.
RS-232C Cable Connection
1
2
3
4
5
6
7
1
2
3
4
5
6
102


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kyocera FS6020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kyocera FS6020 in the language / languages: English as an attachment in your email.

The manual is 4,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info