20377
97
Zoom out
Zoom in
Previous page
1/110
Next page
Chapter 6 Option Units
6-6
Insert the hard disk into its slot on the main circuit board of
the printer. If a hard disk unit is installed in the printer,
received data can be rasterized and stored on this hard disk.
This enables high-speed printing of multiple copies using an
electric sort function. Also, you can use the e-MPS functions.
For details, see
e-MPS on page 1-35
.
For details of available hard disk, see your dealer.
The hard disk should be installed only by a Kyocera Mita au-
thorized dealer or Kyocera Mita certified technician. Kyocera
Mita shall not be liable for damage due to improper installation
of the hard disk.
The following instructions are intended for the technician only.
Turn off the printer and disconnect the power cord
and printer cable.
Remove the screw from the printer’s right side cover
and pull the side cover.
Insert the optional hard disk unit into the slot.
Replace the right side cover on the printer and
tighten the screw to secure the hard disk unit in the
reverse order of removal in step 2 above.
Format the installed hard disk. For details, see
Using the Option Hard Disk on page 1-49
.
Insert the memory card into the memory card slot located on
the rear side of the printer. A memory card is a microchip
card that may contain option fonts, etc. The printer reads the
contents of the card into its internal memory when the
printer is turned on.
For details of available memory cards, see your dealer.
Turn off the printer.
Do not insert or remove a memory card while power is
on. If the memory card is removed while the printer is
on, damage could result in the printer’s electronics or
the memory card.
Insert the memory card in the slot. Insert it as its
surface facing toward the left, connector end first.
Push it in all the way.
Format the installed memory card. For details, see
Using the Memory Card on page 1-46
.
Hard Disk
NOTE
1
2
3
Memory Card
NOTE
4
1
2
97


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kyocera FS6020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kyocera FS6020 in the language / languages: English as an attachment in your email.

The manual is 4,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info