20377
71
Zoom out
Zoom in
Previous page
1/110
Next page
Chapter 2 Paper Selection
2-4
Processing: It is recommended that you do not use processed
paper such as follows even if they satisfy basic paper
specifications.
•Shiny paper
Paper with watermarks
•Surface printed paper
Perforated paper
Paper with holes
This section explains printing on special paper. The page
printer can use the following types of special paper. In this
case, set the media type according to the table below.
When using the above types of paper, be sure to use products
that are specified for use with photocopiers and/or page
printers. Feed paper other than colored paper or pre-printed
paper from the MP (multi-purpose) tray. Use paper that is
sold specifically for use with copiers (heat-fusing type). Label
paper and envelopes should not be placed in the cassette.
Since the composition and quality of special paper vary
considerably, special paper is more likely than white bond
paper to give trouble during printing. No liability will be
assumed if moisture, etc., given off in printing on special
paper causes harm to the machine or operator.
Before purchasing any type of special paper, test a sample on
the printer and check that the print quality is satisfactory.
Specifications for each type of special paper are given below.
Transparency must be able to withstand the heat of fusing
during the printing process. It should satisfy the conditions
given in the table below.
If transparency jams frequently, pull the top of the sheet very
gently as it leaves the printer.
Special Paper
Paper type to be used Media type to be selected
Thin paper (60 to 64 g/m
2
)Thin
Thick paper (90 to 200 g/m
2
)Thick
Colored paper Color
Recycled paper Recycle
Overhead projector
transparencies
Transparency
Postcards Cardstock
Envelopes Envelope
Label Labels
NOTE
Transparency (Overhead Projection Film)
Item Specification
Tolerance of heat Must tolerate at least 190 °C
(374 °F)
Thickness 0.100 to 0.110 mm
(3.9 to 4.3 mils)
Material Polyester
Dimensional accuracy ±0.7 mm (±0.0276 inches)
Squareness of corners 90° ± 0.2°
71


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kyocera FS6020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kyocera FS6020 in the language / languages: English as an attachment in your email.

The manual is 4,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info